144 KiB
144 KiB
Parameter values for YouTube simulations
Created by Nils Berglund and optimized by Marco Mancini
C code for videos on YouTube Channel https://www.youtube.com/c/NilsBerglund
Below are parameter values used for different simulations, as well as initial conditions used in function animation. Some simulations use variants of the published code. The list is going to be updated gradually.
I changed the way the energy density is computed around 7 July. If you use a recent version of the code, it may be necessary to modify two constants as follows:
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define E_SCALE 750.0 /* scaling factor for energy representation */
29 July 21 - Laser in a room of mirrors, with trails and close-up
Program: Variant of particle_billiard.c (to be published later on)
Initial condition in function animation(): init_drop_config(x_shooter, y_shooter, 0.0, DPI, configs);
The effect of showing trails is achieved by switching off double-buffering like this:
int main(int argc, char** argv)
{
glutInit(&argc, argv);
if (SHOWTRAILS) glutInitDisplayMode(GLUT_RGB | GLUT_SINGLE | GLUT_DEPTH);
else glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE | GLUT_DEPTH);
glutInitWindowSize(WINWIDTH,WINHEIGHT);
glutCreateWindow("Billiard animation");
init();
glutDisplayFunc(display);
glutMainLoop();
return 0;
}
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -1.3
#define XMAX 2.7 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 21 /* choice of domain shape */
#define CIRCLE_PATTERN 3 /* pattern of circles */
#define ABSORBING_CIRCLES 1 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.0 /* parameter controlling shape of billiard */
#define MU 0.015 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 0.25 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 5000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1 /* set to 1 to keep trails of the particles */
#define SHOWZOOM 1 /* set to 1 to show a zoom (for laser in room of mirrors) */
#define NSTEPS 2000 /* number of frames of movie */
#define TIME 1500 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000005 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 32 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.007 /* length of velocity vectors */
#define BILLIARD_WIDTH 6 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
28 July 21 - An invisibility cloak (first optimized version)
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -1.0
#define XMAX 3.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 6 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.2 /* parameter controlling the dimensions of domain */
#define MU 0.005 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 2000 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 100 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
27 July 21 - Wave protection comparison 1: Square grid of obstacles vs nothing
Program: wave_comparison.c (variant of wave_billiard.c)
Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN_A 20 /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN_A 99 /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 0 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 2250 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
26 July 21 - Right as rain: Light encountering a raindrop with index of refraction 1.333
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 3 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 5 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.005 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 6000 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
25 July 21 - How to avoid being hit by a laser in a room of mirrors
Program: Variant of particle_billiard.c (to be published later on)
Initial condition in function animation(): init_drop_config(x_shooter, y_shooter, 0.0, DPI, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 21 /* choice of domain shape */
#define CIRCLE_PATTERN 3 /* pattern of circles */
#define ABSORBING_CIRCLES 1 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.0 /* parameter controlling shape of billiard */
#define MU 0.015 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 0.25 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 5000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define NSTEPS 2000 /* number of frames of movie */
#define TIME 1500 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000005 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 16 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.02 /* length of velocity vectors */
#define BILLIARD_WIDTH 2 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
24 July 21 - A cloaking device (non-optimized version)
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -1.0
#define XMAX 3.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 5 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.4 /* parameter controlling the dimensions of domain */
#define MU 0.005 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.003 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 2000 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 100 /* time after which to start saving frames */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.7 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
23 July 21 - There's something in my prism and it's not me: Planar wave refracting through a prism
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 720 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 720 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -1.125
#define XMAX 1.125 /* x interval */
#define YMIN -0.9
#define YMAX 1.35 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 8 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 4 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.025 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.005 /* Courant number */
#define COURANTB 0.01 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_BC 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_BC 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 1350 /* number of frames of movie */
#define NVID 70 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 20 /* time after which to start saving frames */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
22 July 21 - Refraction of a wave on region with higher propagation speed
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.05, 0.0, phi, psi, xy_in);
Up to this date, constants were not yet moved to files global_pdes.c or global_particles.c
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -1.8
#define XMAX 1.8 /* x interval */
#define YMIN -1.0125
#define YMAX 1.0125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 3 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_HEX 13 /* haxagonl grid of disks */
#define D_DISK_PERCOL 14 /* random grid of percolation type */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
#define D_MENGER_ROTATED 17 /* rotated Menger-Sierpinski carpet */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.025 /* parameter controlling the dimensions of domain */
#define NPOLY 5 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.02 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_BC 1.0e-4 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_BC 5.0e-4 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 3
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
#define BC_VPER_HABS 3 /* vertically periodic and horizontally absorbing boundary conditions */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 7000 /* number of frames of movie */
#define NVID 50 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 200 /* time after which to start saving frames */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 1
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
#define P_MIXED 2 /* plot amplitude in upper half, energy in lower half */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
21 July 21 - Close encounters of the nerd kind: 30,000 particles smashing into a triangular grid of circles
Program: x.c
Initial condition in function animation(): xxx
20 July 21 - The amplitude of the fish
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.05, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.1 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 18 /* choice of domain shape */
/* superseded in later versions by D_DOMAIN 20 with D_CIRCLES 20
and CIRCLE_PATTERN 4 with C_RAND_POISSON 4 */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_RANDOM 13 /* grid of randomly displaced disks */
#define D_DISK_PERCOL 14 /* random grid of percolation type */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
#define D_MENGER_ROTATED 17 /* rotated Menger-Sierpinski carpet */
#define D_DISK_POISSON 18 /* random grid given by Poisson process */
/* superseded in later versions by D_DOMAIN 20 with D_CIRCLES 20
and CIRCLE_PATTERN 4 with C_RAND_POISSON 4 */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 0.85 /* parameter controlling the dimensions of domain */
#define MU 0.02 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 30 /* number of grid point for grid of disks */
#define NGRIDY 40 /* number of grid point for grid of disks */
#define NSCATTERERS 300 /* number of scatterers for Poisson random grid */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_BC 1.0e-4 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_BC 5.0e-4 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 3
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
#define BC_VPER_HABS 3 /* vertically periodic and horizontally absorbing boundary conditions */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 5800 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 0
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
#define P_MIXED 2 /* plot amplitude in upper half, energy in lower half */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -240.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
19 July 21 - 10,000 particles on a genus 10 surface
Program: particle_billiard.c
Initial condition in function animation(): init_drop_config(0.0, 0.0, PI, DPI, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table */
#define B_DOMAIN 14 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_REULEAUX 9 /* Reuleaux and star shapes */
#define D_FLOWER 10 /* Bunimovich flower */
#define D_ALT_REU 11 /* alternating between star and Reuleaux */
#define D_ANGLE 12 /* angular sector */
#define D_LSHAPE 13 /* L-shaped billiard for conical singularity */
#define D_GENUSN 14 /* polygon with identifies opposite sides */
#define LAMBDA 0.75 /* parameter controlling shape of billiard */
#define MU 0.1 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 40 /* number of sides of polygon */
#define APOLY 0.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 10002 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define NSTEPS 7650 /* number of frames of movie */
#define TIME 1000 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000005 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 20 /* number of colors */
#define COLORSHIFT 200 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.02 /* length of velocity vectors */
#define BILLIARD_WIDTH 3 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
18 July 21 - Refraction (and diffraction) through a raindrop
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.05, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -1.8
#define XMAX 1.8 /* x interval */
#define YMIN -1.0125
#define YMAX 1.0125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 3 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_HEX 13 /* haxagonl grid of disks */
#define D_DISK_PERCOL 14 /* random grid of percolation type */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
#define D_MENGER_ROTATED 17 /* rotated Menger-Sierpinski carpet */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.025 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.003 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_BC 1.0e-4 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_BC 5.0e-4 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 3
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
#define BC_VPER_HABS 3 /* vertically periodic and horizontally absorbing boundary conditions */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 9000 /* number of frames of movie */
#define NVID 50 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 300 /* time after which to start saving frames */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 1
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
#define P_MIXED 2 /* plot amplitude in upper half, energy in lower half */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
17 July 21 - Mystery billiard 8
Program: variant of particle_billiard.c
Initial condition in function animation(): init_drop_config(0.0, 0.0, -0.1*PID, 0.1*PID, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 720 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -1.125
#define XMAX 1.125 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_REULEAUX 9 /* Reuleaux and star shapes */
#define D_FLOWER 10 /* Bunimovich flower */
#define D_ALT_REU 11 /* alternating between star and Reuleaux */
#define D_ANGLE 12 /* angular sector */
#define D_LSHAPE 13 /* L-shaped billiard for conical singularity */
#define D_GENUSN 14 /* polygon with identifies opposite sides */
#define D_CIRCLES 20 /* several circles */
#define NCIRCLES 4 /* number of circles */
#define CIRCLE_PATTERN 0 /* pattern of circles */
#define C_SQUARE 0 /* square grid of circles */
#define LAMBDA 2.0 /* parameter controlling shape of billiard */
#define MU 0.7 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 0.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 0 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 4000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define NSTEPS 1350 /* number of frames of movie */
#define TIME 750 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000015 /* integration step */
#define NVID 50 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 15 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 0 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.02 /* length of velocity vectors */
#define BILLIARD_WIDTH 3 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
16 July 21 - So long and thanks for all the fish - linear wave hitting a Poisson process of obstacles
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.05, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.1 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 18 /* choice of domain shape */
/* superseded in later versions by D_DOMAIN 20 with D_CIRCLES 20
and CIRCLE_PATTERN 4 with C_RAND_POISSON 4 */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_RANDOM 13 /* grid of randomly displaces disks */
#define D_DISK_PERCOL 14 /* random grid of percolation type */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
#define D_MENGER_ROTATED 17 /* rotated Menger-Sierpinski carpet */
#define D_DISK_POISSON 18 /* random grid given by Poisson process */
/* superseded in later versions by D_DOMAIN 20 with D_CIRCLES 20
and CIRCLE_PATTERN 4 with C_RAND_POISSON 4 */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 0.85 /* parameter controlling the dimensions of domain */
#define MU 0.02 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 30 /* number of grid point for grid of disks */
#define NGRIDY 40 /* number of grid point for grid of disks */
#define NSCATTERERS 300 /* number of scatterers for Poisson random grid */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_BC 1.0e-4 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_BC 5.0e-4 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 3
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
#define BC_VPER_HABS 3 /* vertically periodic and horizontally absorbing boundary conditions */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 5800 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 2
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
#define P_MIXED 2 /* plot amplitude in upper half, energy in lower half */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -240.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
15 July 21 - Octagonal representation of a genus 2 surface
Program: particle_billiard.c
Initial condition in function animation(): init_drop_config(0.0, 0.0, -0.5*PID, 0.5*PID, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table */
#define B_DOMAIN 14 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_REULEAUX 9 /* Reuleaux and star shapes */
#define D_FLOWER 10 /* Bunimovich flower */
#define D_ALT_REU 11 /* alternating between star and Reuleaux */
#define D_ANGLE 12 /* angular sector */
#define D_LSHAPE 13 /* L-shaped billiard for conical singularity */
#define D_GENUSN 14 /* polygon with identifies opposite sides */
#define LAMBDA 0.75 /* parameter controlling shape of billiard */
#define MU 0.1 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 0.25 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 20002 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define NSTEPS 7000 /* number of frames of movie */
#define TIME 1000 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000005 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 16 /* number of colors */
#define COLORSHIFT 200 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.02 /* length of velocity vectors */
#define BILLIARD_WIDTH 3 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
14 July 21 - Young's double-slit experiment, evolution of the phase
Program: schrodinger.c
Initial condition in function animation(): init_coherent_state(-0.8, 0.0, 20.0, 0.0, 0.25, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 720 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 720 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -1.25
#define XMAX 1.25 /* x interval */
#define YMIN -1.25
#define YMAX 1.25 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 9 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_HEX 13 /* haxagonl grid of disks */
#define D_DISK_PERCOL 14 /* random grid of percolation type */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
#define D_MENGER_ROTATED 17 /* rotated Menger-Sierpinski carpet */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 0.3 /* parameter controlling the dimensions of domain */
#define MU 0.05 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.000000005
#define HBAR 1.0
/* Boundary conditions */
#define B_COND 0
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
/* Parameters for length and speed of simulation */
#define NSTEPS 1200 /* number of frames of movie */
#define NVID 1200 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Plot type */
#define PLOT 1
#define P_MODULE 0 /* plot module of wave function squared */
#define P_PHASE 1 /* plot phase of wave function */
#define P_REAL 2 /* plot real part */
#define P_IMAGINARY 3 /* plot imaginary part */
/* Color schemes */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define C_PHASE 2 /* color scheme shows phase */
#define SCALE 1 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.75 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 150.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -150.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
13 July 21 - Planar wave hitting a percolation-style random arrangement of obstacles
Program: Variant of wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.05, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
/* setting NX to WINWIDTH and NY to WINHEIGHT increases resolution */
/* but will multiply run time by 4 */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.1 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 14 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_RANDOM 13 /* grid of randomly displaces disks */
#define D_DISK_PERCOL 14 /* random grid of percolation type */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 1.0 /* parameter controlling the dimensions of domain */
#define MU 0.02 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 30 /* number of grid point for grid of disks */
#define NGRIDY 40 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_BC 1.0e-4 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_BC 5.0e-4 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 3
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
#define BC_VPER_HABS 3 /* vertically periodic and horizontally absorbing boundary conditions */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 6000 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 2
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
#define P_MIXED 2 /* plot amplitude in upper half, energy in lower half */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -240.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
12 July 21 - Expanding perfect wave front on a genus 2 surface, generic initial point
Program: drop_billiard.c
Initial condition in function animation(): init_drop_config(-1.0 + 0.3*sqrt(2.0), -1.0 + 0.5*sqrt(2.0), 0.0, DPI, configs);
#define MOVIE 0 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 13 /* choice of domain shape */
#define CIRCLE_PATTERN 0 /* pattern of circles */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.124950941 /* sin(36°)/sin(31.5°) for 5-star shape with 45° angles */
#define MU 0.1 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 5 /* number of sides of polygon */
#define APOLY -1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define NPART 50000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define NSTEPS 5500 /* number of frames of movie */
#define TIME 40 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.0001 /* integration step */
#define NVID 20 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* For a good quality movie, take for instance TIME = 50, DPHI = 0.0002 */
/* simulation parameters */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define LPERIODIC 0.1 /* lines longer than this are not drawn (useful for Sinai billiard) */
#define LCUT 2.0 /* controls the max size of segments not considered as being cut */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 0 /* set to 1 for closed curve (start in all directions) */
#define ORDER_COLORS 1 /* set to 1 if colors should be drawn in order */
/* color and other graphical parameters */
#define NCOLORS 16 /* number of colors */
#define COLORSHIFT 200 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define NSEG 100 /* number of segments of boundary */
#define BILLIARD_WIDTH 4 /* width of billiard */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 300.0 /* color outside billiard */
#define PAINT_INT 1 /* set to 1 to paint interior in other color (for polygon) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 100 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
11 July 21 - Wave crashing into a percolation-style random arrangement of obstacles
Program: Variant of wave_billiard.c
Initial condition in function animation(): init_wave(-1.5, 0.0, phi, psi, phi_tmp, psi_tmp, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.1 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 14 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_RANDOM 13 /* grid of randomly displaces disks */
#define D_DISK_PERCOL 14 /* random grid of percolation type */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 1.0 /* parameter controlling the dimensions of domain */
#define MU 0.02 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 30 /* number of grid point for grid of disks */
#define NGRIDY 40 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define GAMMA 0.0 /* damping factor in wave equation */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 2
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
#define BC_VPER_HABS 3 /* vertically periodic and horizontally absorbing boundary conditions */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 3800 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 2
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
#define P_MIXED 2 /* plot amplitude in upper half, energy in lower half */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -240.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
10 July 21 - Doors and corners, kid - Billiard in a 30 degrees angle
Program: Variant of particle_billiard.c
Initial condition in function animation(): init_drop_config(-1.2, 0.4, -0.35*PID, -0.15*PID, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 720 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -1.25
#define XMAX 1.25 /* x interval */
#define YMIN -1.25
#define YMAX 1.25 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table */
#define B_DOMAIN 12 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_REULEAUX 9 /* Reuleaux and star shapes */
#define D_FLOWER 10 /* Bunimovich flower */
#define D_ALT_REU 11 /* alternating between star and Reuleaux */
#define D_ANGLE 12 /* angular sector */
#define D_LSHAPE 13 /* L-shaped billiard for conical singularity */
#define LAMBDA 0.166666666666 /* parameter controlling shape of billiard */
#define MU 0.1 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 500 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define NSTEPS 500 /* number of frames of movie */
#define TIME 1000 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000006 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 6 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.04 /* length of velocity vectors */
#define BILLIARD_WIDTH 3 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
9 July 21 - Soft obstacles: a wave encountering a grid of refracting circles
Program: Variant of wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.02, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.1 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 13 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_HEX 13 /* haxagonl grid of disks */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 1.0 /* parameter controlling the dimensions of domain */
#define MU 0.025 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANTA 0.01 /* Courant number in medium A */
#define COURANTB 0.005 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 3
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
#define BC_VPER_HABS 3 /* vertically periodic and horizontally absorbing boundary conditions */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 5500 /* number of frames of movie */
#define NVID 25 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 2
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
#define P_MIXED 2 /* plot amplitude in upper half, energy in lower half */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
8 July 21 - Expanding perfect wave front on a genus 2 surface
Program: drop_billiard.c
Initial condition in function animation(): init_drop_config(-0.5, -0.5, 0.0, DPI, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table */
#define B_DOMAIN 13 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_REULEAUX 9 /* Reuleaux and star shapes */
#define D_FLOWER 10 /* Bunimovich flower */
#define D_ALT_REU 11 /* alternating between star and Reuleaux */
#define D_ANGLE 12 /* angular sector */
#define D_LSHAPE 13 /* L-shaped billiard for conical singularity */
#define LAMBDA 1.124950941 /* sin(36°)/sin(31.5°) for 5-star shape with 45° angles */
#define MU 0.1 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 5 /* number of sides of polygon */
#define APOLY -1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define NPART 50000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define NSTEPS 5000 /* number of frames of movie */
#define TIME 40 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.0001 /* integration step */
#define NVID 20 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* For a good quality movie, take for instance TIME = 50, DPHI = 0.0002 */
/* simulation parameters */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define LPERIODIC 0.1 /* lines longer than this are not drawn (useful for Sinai billiard) */
#define LCUT 2.0 /* controls the max size of segments not considered as being cut */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 0 /* set to 1 for closed curve (start in all directions) */
#define ORDER_COLORS 1 /* set to 1 if colors should be drawn in order */
/* color and other graphical parameters */
#define NCOLORS 16 /* number of colors */
#define COLORSHIFT 200 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define NSEG 100 /* number of segments of boundary */
#define BILLIARD_WIDTH 4 /* width of billiard */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 300.0 /* color outside billiard */
#define PAINT_INT 1 /* set to 1 to paint interior in other color (for polygon) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 100 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
7 July 21 - Planar wave encountering a hexagonal grid (amplitude and energy)
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.02, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.1 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 13 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_HEX 13 /* haxagonl grid of disks */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 1.0 /* parameter controlling the dimensions of domain */
#define MU 0.025 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANTA 0.01 /* Courant number in medium A */
#define COURANTB 0.005 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 3
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
#define BC_VPER_HABS 3 /* vertically periodic and horizontally absorbing boundary conditions */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 5500 /* number of frames of movie */
#define NVID 25 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 2
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
#define P_MIXED 2 /* plot amplitude in upper half, energy in lower half */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
6 July 21 - Working the angle - 108 degrees, or why regular pentagons cut wave fronts into pieces
Program: Variant of particle_billiard.c
Initial condition in function animation(): init_drop_config(-1.0, 1.0, -0.65*PID, -0.4*PID, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
// #define XMIN -1.8
// #define XMAX 1.8 /* x interval */
// #define YMIN -0.91
// #define YMAX 1.115 /* y interval for 9/16 aspect ratio */
/* Choice of the billiard table */
#define B_DOMAIN 12 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_REULEAUX 9 /* Reuleaux and star shapes */
#define D_FLOWER 10 /* Bunimovich flower */
#define D_ALT_REU 11 /* alternating between star and Reuleaux */
#define D_ANGLE 12 /* angular sector */
#define LAMBDA 0.6 /* parameter controlling shape of billiard */
#define MU 0.1 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 500 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define NSTEPS 650 /* number of frames of movie */
#define TIME 1000 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000006 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 6 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.04 /* length of velocity vectors */
#define BILLIARD_WIDTH 3 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
5 July 21 - Waves colliding with a hexagonal grid
Program: wave_billiard.c
Initial condition in function animation(): init_wave(-1.5, 0.0, phi, psi, phi_tmp, psi_tmp, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.1 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 13 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_HEX 13 /* haxagonl grid of disks */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 1.0 /* parameter controlling the dimensions of domain */
#define MU 0.025 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define GAMMA 0.0 /* damping factor in wave equation */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 2
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 8000 /* number of frames of movie */
#define NVID 25 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 0
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -240.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
4 July 21 - A "billiard" with a 1080 degrees angle
Program: particle_billiard.c
Initial condition in function animation(): init_line_config(0.0, -1.0, -1.0, 1.0, atan(0.5), configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table */
#define B_DOMAIN 13 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_REULEAUX 9 /* Reuleaux and star shapes */
#define D_FLOWER 10 /* Bunimovich flower */
#define D_ALT_REU 11 /* alternating between star and Reuleaux */
#define D_ANGLE 12 /* angular sector */
#define D_LSHAPE 13 /* L-shaped billiard for conical singularity */
#define LAMBDA 0.75 /* parameter controlling shape of billiard */
#define MU 0.1 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 2001 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define NSTEPS 1788 /* number of frames of movie */
#define TIME 1000 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000005 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 12 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.04 /* length of velocity vectors */
#define BILLIARD_WIDTH 3 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
3 July 21 - Anderson localization: randomly placed mangroves offer better tsunami protection
Program: wave_billiard.c
Initial condition in function animation(): init_wave(-1.5, 0.0, phi, psi, phi_tmp, psi_tmp, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.1 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 13 /* choice of domain shape */
/* superseded in later versions by D_DOMAIN 20 with D_CIRCLES 20
and CIRCLE_PATTERN 2 with C_RAND_DISPLACED 2 */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_DISK_RANDOM 13 /* grid of randomly displaces disks */
/* superseded in later versions by D_DOMAIN 20 with D_CIRCLES 20
and CIRCLE_PATTERN 2 with C_RAND_DISPLACED 2 */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 1.0 /* parameter controlling the dimensions of domain */
#define MU 0.025 /* parameter controlling the dimensions of domain */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define GAMMA 0.0 /* damping factor in wave equation */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions */
#define B_COND 2
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters for length and speed of simulation */
#define NSTEPS 5500 /* number of frames of movie */
#define NVID 25 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type */
#define PLOT 1
#define P_AMPLITUDE 0 /* plot amplitude of wave */
#define P_ENERGY 1 /* plot energy of wave */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.02 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -240.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
2 July 21 - #shorts: Working the angle - 120 degrees
Program: Variant of particle_billiard.c
Initial condition in function animation(): init_drop_config(-1.0, 1.0, -0.65*PID, -0.4*PID, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table */
#define B_DOMAIN 12 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_REULEAUX 9 /* Reuleaux and star shapes */
#define D_FLOWER 10 /* Bunimovich flower */
#define D_ALT_REU 11 /* alternating between star and Reuleaux */
#define D_ANGLE 12 /* angular sector */
#define LAMBDA 0.6666666666666666 /* parameter controlling shape of billiard */
#define MU 0.1 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 500 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define NSTEPS 700 /* number of frames of movie */
#define TIME 1000 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000006 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 6 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.04 /* length of velocity vectors */
#define BILLIARD_WIDTH 3 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327
1 July 21 - #shorts: Young's double-slit experiment with a quantum particle
Program: schrodinger.c
Initial condition in function animation(): init_coherent_state(-1.2, 0.0, 20.0, 0.0, 0.25, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 9 /* choice of domain shape */
#define D_RECTANGLE 0 /* rectangular domain */
#define D_ELLIPSE 1 /* elliptical domain */
#define D_STADIUM 2 /* stadium-shaped domain */
#define D_SINAI 3 /* Sinai billiard */
#define D_DIAMOND 4 /* diamond-shaped billiard */
#define D_TRIANGLE 5 /* triangular billiard */
#define D_FLAT 6 /* flat interface */
#define D_ANNULUS 7 /* annulus */
#define D_POLYGON 8 /* polygon */
#define D_YOUNG 9 /* Young diffraction slits */
#define D_GRATING 10 /* diffraction grating */
#define D_EHRENFEST 11 /* Ehrenfest urn type geometry */
#define D_DISK_GRID 12 /* grid of disks */
#define D_MENGER 15 /* Menger-Sierpinski carpet */
#define D_JULIA_INT 16 /* interior of Julia set */
/* Billiard tables for heat equation */
#define D_ANNULUS_HEATED 21 /* annulus with different temperatures */
#define D_MENGER_HEATED 22 /* Menger gasket with different temperatures */
#define D_MENGER_H_OPEN 23 /* Menger gasket with different temperatures and larger domain */
#define D_MANDELBROT 24 /* Mandelbrot set */
#define D_JULIA 25 /* Julia set */
#define D_MANDELBROT_CIRCLE 26 /* Mandelbrot set with circular conductor */
#define LAMBDA 0.3 /* parameter controlling the dimensions of domain */
#define MU 0.05 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.000000005
#define HBAR 1.0
/* Boundary conditions */
#define B_COND 1
#define BC_DIRICHLET 0 /* Dirichlet boundary conditions */
#define BC_PERIODIC 1 /* periodic boundary conditions */
#define BC_ABSORBING 2 /* absorbing boundary conditions (beta version) */
/* Parameters for length and speed of simulation */
#define NSTEPS 1400 /* number of frames of movie */
#define NVID 1200 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Plot type */
#define PLOT 0
#define P_MODULE 0 /* plot module of wave function squared */
#define P_PHASE 1 /* plot phase of wave function */
#define P_REAL 2 /* plot real part */
#define P_IMAGINARY 3 /* plot imaginary part */
/* Color schemes */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 1 /* choice of color scheme */
#define C_LUM 0 /* color scheme modifies luminosity (with slow drift of hue) */
#define C_HUE 1 /* color scheme modifies hue */
#define C_PHASE 2 /* color scheme shows phase */
#define SCALE 1 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 150.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -150.0 /* amplitude of variation of hue for color scheme C_HUE */
/* Basic math */
#define PI 3.141592654
#define DPI 6.283185307
#define PID 1.570796327