YouTube-simulations/Parameters_August21.md
nilsberglund-orleans 8d7ac9b26a
Add files via upload
2021-09-01 17:11:59 +02:00

164 KiB
Raw Blame History

31 August 21 - A Sinai pinball with colored pegs

Program: particle_pinball.c (variant of particle_billiard.c)

Initial condition in function animation(): init_drop_config(-1.4, 0.0, -0.5*PID, 0.5*PID, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 21      /* choice of domain shape */

#define CIRCLE_PATTERN 21    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 2000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 48            /* number of circles in x direction */
#define NCY 28            /* number of circles in y direction */
// #define NCX 52            /* number of circles in x direction */
// #define NCY 30            /* number of circles in y direction */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 1.68	/* parameter controlling shape of domain */
#define MU 0.027         /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 1         /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1    /* set to 1 to keep trails of the particles */

#define NSTEPS 15000     /* number of frames of movie */
#define TIME 1500         /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.00004     /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 64      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 0  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.045      /* length of velocity vectors */
#define BILLIARD_WIDTH 2    /* width of billiard */
#define PARTICLE_WIDTH 2    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define ERASE_OUTSIDE 1     /* set to 1 to erase outside of rectangular billiard (beta) */


#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */
#define END_FRAMES 100   /* number of still frames at end of movie */

30 August 21 - Erosion of a wave protection

Program: mangrove.c

Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 8   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.75	    /* parameter controlling the dimensions of domain */
#define MU 0.03	            /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1    /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 1  /* set to 1 to enforce a planar wave on top and bottom boundary */
#define X_SHIFT -0.8        /* x range on which to apply OSCILLATE_TOPBOT */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define K_BC 3.0           /* spatial period of periodic excitation in y direction */
#define KX_BC 30.0           /* spatial period of periodic excitation in x direction */
#define KY_BC 10.0           /* spatial period of periodic excitation in y direction */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.005     /* Courant number in medium B */
#define GAMMA 2.0e-6          /* damping factor in wave equation */
#define GAMMAB 1.0e-4           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0               /* "elasticity" term enforcing oscillations */
#define KAPPAB 1.0e-6           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 6500      /* number of frames of movie */
#define NVID 35          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 125    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0      /* amplitude of variation of hue for color scheme C_HUE */

/* mangrove colors */

#define MANGROVE_HUE_MIN 180.0      /* color of original mangrove */
#define MANGROVE_HUE_MAX 0.0        /* color of saturated mangrove */
// #define MANGROVE_EMAX 5.0e-3           /* max energy for mangrove to survive */
#define MANGROVE_EMAX 1.0e-3           /* max energy for mangrove to survive */

/* For debugging purposes only */
#define FLOOR 1         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

29 August 21 - Mixing in an ehrenfest-type pinball

Program: particle_pinball.c

Initial condition in function animation(): init_double_drop_config(-1.25, 0.05, 0.0, DPI, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 21      /* choice of domain shape */

#define CIRCLE_PATTERN 1    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 9            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 1.8	/* parameter controlling shape of domain */
#define MU 0.03          /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 5000        /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0    /* set to 1 to keep trails of the particles */

#define NSTEPS 4500     /* number of frames of movie */
#define TIME 1500        /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.00001    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 2       /* number of colors */
#define COLORSHIFT 10.0    /* hue of initial color */ 
#define RAINBOW_COLOR 1  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.02      /* length of velocity vectors */
#define BILLIARD_WIDTH 2    /* width of billiard */
#define PARTICLE_WIDTH 3    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define ERASE_OUTSIDE 1     /* set to 1 to erase outside of rectangular domain */

#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */
#define END_FRAMES 100   /* number of still frames at end of movie */

28 August 21 - Wave protection comparison 8: "Golden spiral" versus Poisson disc sampling with a step input

Program: wave_comparison.c

Initial condition in function animation(): init_wave_flat_comp(phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20    /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 11      /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 8     /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.8	    /* parameter controlling the dimensions of domain */
#define MU 0.03 	    /* parameter controlling the dimensions of domain */
#define MUB 0.03	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 20            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1    /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0  /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.0          /* frequency of periodic excitation */
#define AMPLITUDE 0.025      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.004    /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMAB 1.0e-8           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 3200      /* number of frames of movie */
#define NVID 25          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 200    /* time after which to start saving frames */
#define COMPUTE_ENERGIES 1  /* set to 1 to compute and print energies */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */
#define END_FRAMES 100   /* number of still frames at end of movie */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 50.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

/* For debugging purposes only */
#define FLOOR 0         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 5.0       /* max value of wave amplitude */

27 August 21 - A wave traveling between two parabolic antennas

Program: wave_billiard.c

Initial condition in function animation(): init_wave(-LAMBDA, 0.0, phi, psi, xy_in);

In init_wave(): if ((xy_in[i][j])||(TWOSPEEDS)) phi[i][j] = 0.2*exp(-dist2/0.00025)*cos(-sqrt(dist2)/0.005);

#define MOVIE 1         /* set to 1 to generate movie */
#define DOUBLE_MOVIE 0  /* set to 1 to produce movies for wave height and energy simultaneously */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 19      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 8   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 1.2	    /* parameter controlling the dimensions of domain */
#define MU 0.5              /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 16           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.01      /* Courant number in medium B */
#define GAMMA 0.0          /* damping factor in wave equation */
#define GAMMAB 1.0e-6           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 2

/* Parameters for length and speed of simulation */

#define NSTEPS 4500      /* number of frames of movie */
#define NVID 25          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 0      /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1        /* final sleeping time */
#define MID_FRAMES 20    /* number of still frames between parts of two-part movie */
#define END_FRAMES 100   /* number of still frames at end of movie */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

#define PLOT_B 0        /* plot type for second movie */

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

/* For debugging purposes only */
#define FLOOR 0         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

26 August 21 - Illustrating the butterfly effect with a laser

Program: particle_pinball_angles.c (variant of particle_billiard.c)

Initial condition in function animation(): angle0 = 0.2 + 2.4815e-6, x0 = -1.1, y0 = -0.5625;

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	720  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -1.125
#define XMAX 1.125	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 20      /* choice of domain shape */

#define CIRCLE_PATTERN 3    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 3            /* number of circles in x direction */
#define NCY 8            /* number of circles in y direction */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.5	/* parameter controlling shape of domain */
#define MU 0.11          /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 1        /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1    /* set to 1 to keep trails of the particles */

#define NSTEPS 1000     /* number of frames of movie */
#define TIME 4200        /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.00001    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 128      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 0  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.02      /* length of velocity vectors */
#define BILLIARD_WIDTH 2    /* width of billiard */
#define PARTICLE_WIDTH 3    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define ERASE_OUTSIDE 0     /* set to 1 to erase outside of rectangular domain */

#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */
#define END_FRAMES 50   /* number of still frames at end of movie */

#define LUM_ATTENUATION 0.0025  /* luminosity attenuation */

#include "global_particles.c"
#include "sub_part_billiard.c"
#include "sub_part_pinball.c"

25 August 21 - Wave protection comparison 7: “Golden spiral” versus Poisson disc sampling

Program: wave_comparison.c

Initial condition in function animation(): int_planar_wave_comp(XMIN + 0.015, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20    /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 11      /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 8     /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.8	    /* parameter controlling the dimensions of domain */
#define MU 0.03 	    /* parameter controlling the dimensions of domain */
#define MUB 0.03	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 20            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.0035        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMAB 1.0e-5           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 3250      /* number of frames of movie */
#define NVID 25          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 200    /* time after which to start saving frames */
#define COMPUTE_ENERGIES 1  /* set to 1 to compute and print energies */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.5        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

/* For debugging purposes only */
#define FLOOR 0         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

24 August 21 - Comparison between 7 non-random and randomized pinballs

Program: particle_pinball.c (variant of particle_billiard.c)

Initial condition in function animation(): init_drop_config(-1.25, 0.05, -0.1, 0.1, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 20      /* choice of domain shape */

#define CIRCLE_PATTERN 3    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.8	/* parameter controlling shape of domain */
#define MU 0.03          /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 500        /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1    /* set to 1 to keep trails of the particles */

#define NSTEPS 1200     /* number of frames of movie */
#define TIME 1500        /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.00001    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 10      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 1  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.02      /* length of velocity vectors */
#define BILLIARD_WIDTH 2    /* width of billiard */
#define PARTICLE_WIDTH 2    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define ERASE_OUTSIDE 0     /* set to 1 to erase outside of rectangular domain */

#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */
#define END_FRAMES 100   /* number of still frames at end of movie */

23 August 21 - A self-healing wave protection

Program: mangrove.c

Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 8   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.75	    /* parameter controlling the dimensions of domain */
#define MU 0.03	            /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1    /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 1  /* set to 1 to enforce a planar wave on top and bottom boundary */
#define X_SHIFT -0.8        /* x range on which to apply OSCILLATE_TOPBOT */

#define OMEGA 0.0004        /* frequency of periodic excitation */
#define K_BC 3.0           /* spatial period of periodic excitation in y direction */
#define KX_BC 6.0           /* spatial period of periodic excitation in x direction */
#define KY_BC 2.0           /* spatial period of periodic excitation in y direction */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.005     /* Courant number in medium B */
#define GAMMA 2.0e-6          /* damping factor in wave equation */
#define GAMMAB 1.0e-4           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0               /* "elasticity" term enforcing oscillations */
#define KAPPAB 1.0e-6           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 5800      /* number of frames of movie */
#define NVID 35          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 125    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0      /* amplitude of variation of hue for color scheme C_HUE */

/* mangrove colors */

#define MANGROVE_HUE_MIN 180.0      /* color of original mangrove */
#define MANGROVE_HUE_MAX 0.0        /* color of saturated mangrove */
#define MANGROVE_EMAX 5.0e-3           /* max energy for mangrove to survive */
// #define MANGROVE_EMAX 1.0e-4           /* max energy for mangrove to survive */

/* For debugging purposes only */
#define FLOOR 1         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

22 August 21 - Blue noise, babys got blue noise: A Poisson disc sampling wave protection

Program: wave_billiard.c

Initial condition in function animation(): init_planar_wave(XMIN + 0.015, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1  /* set to 1 to produce movies for wave height and energy simultaneously */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 8   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.85	    /* parameter controlling the dimensions of domain */
#define MU 0.03             /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 16           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.01      /* Courant number in medium B */
#define GAMMA 0.0          /* damping factor in wave equation */
#define GAMMAB 1.0e-6           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 4000      /* number of frames of movie */
#define NVID 25          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 200    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1        /* final sleeping time */
#define MID_FRAMES 20    /* number of still frames between parts of two-part movie */
#define END_FRAMES 100   /* number of still frames at end of movie */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

#define PLOT_B 0        /* plot type for second movie */

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.5        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

/* For debugging purposes only */
#define FLOOR 0         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

21 August 21 - A Sinai pinball with infinite horizon

Program: Variant of particle_billiard.c

Initial condition in function animation(): init_drop_config(-1.4, 0.0, -0.5*PID, 0.5*PID, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 21      /* choice of domain shape */

#define CIRCLE_PATTERN 2    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 30            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */

#define LAMBDA 1.7	/* parameter controlling shape of domain */
#define MU 0.028        /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 1         /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1    /* set to 1 to keep trails of the particles */

#define NSTEPS 11725     /* number of frames of movie */
#define TIME 1400         /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.00004     /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 256      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 0  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.045      /* length of velocity vectors */
#define BILLIARD_WIDTH 2    /* width of billiard */
#define PARTICLE_WIDTH 2    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define ERASE_OUTSIDE 1     /* set to 1 to erase outside of rectangular billiard (beta) */


#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */
#define END_FRAMES 100   /* number of still frames at end of movie */

20 August 21 - A wave protection alternating square and triangular grids

Program: wave_billiard.c

Initial condition in function animation(): init_planar_wave(XMIN + 0.015, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1  /* set to 1 to produce movies for wave height and energy simultaneously */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 12   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.85	    /* parameter controlling the dimensions of domain */
#define MU 0.03             /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 16           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.01      /* Courant number in medium B */
#define GAMMA 0.0          /* damping factor in wave equation */
#define GAMMAB 1.0e-6           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 3000      /* number of frames of movie */
#define NVID 20          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 250    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

#define PLOT_B 1        /* plot type for second movie */

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.5        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

/* For debugging purposes only */
#define FLOOR 0         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

19 August 21 - How a parabolic antenna works

Program: wave_billiard.c

Initial condition in function animation(): ``

#define MOVIE 1         /* set to 1 to generate movie */
#define DOUBLE_MOVIE 0  /* set to 1 to produce movies for wave height and energy simultaneously */

/* General geometrical parameters */

#define WINWIDTH 	720  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 720          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -0.625
#define XMAX 1.625	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 18      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 12   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.25	    /* parameter controlling the dimensions of domain */
#define MU 0.03             /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 16           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.01      /* Courant number in medium B */
#define GAMMA 0.0          /* damping factor in wave equation */
#define GAMMAB 1.0e-6           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 2

/* Parameters for length and speed of simulation */

#define NSTEPS 1400      /* number of frames of movie */
#define NVID 25          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 0    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

#define PLOT_B 1        /* plot type for second movie */

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

/* For debugging purposes only */
#define FLOOR 0         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

18 August 21 - An pinball Ehrenfest model

Program: Variant of particle_billiard.c

Initial condition in function animation(): init_drop_config(-1.4, 0.0, -0.5*PID, 0.5*PID, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 21      /* choice of domain shape */

#define CIRCLE_PATTERN 1    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 9            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */

#define LAMBDA 1.8	/* parameter controlling shape of domain */
#define MU 0.04         /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 1000        /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0    /* set to 1 to keep trails of the particles */

#define NSTEPS 3500     /* number of frames of movie */
#define TIME 1500        /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.00001    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 50      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 0  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.03      /* length of velocity vectors */
#define BILLIARD_WIDTH 2    /* width of billiard */
#define PARTICLE_WIDTH 3    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */


#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */

17 August 21 - Wave protection comparison 6: randomized square grid vs Sierpinski carpet

Program: wave_comparison.c (variant of wave_billiard.c)

Initial condition in function animation(): init_planar_wave(XMIN + 0.015, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -1.8
#define XMAX 1.8	/* x interval */
#define YMIN -1.0125
#define YMAX 1.0125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 15      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 2     /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 10    /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.8	    /* parameter controlling the dimensions of domain */
#define MU 0.0346	    /* parameter controlling the dimensions of domain */
#define MUB 0.03	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 20            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.0035        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMAB 1.0e-5           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 4500      /* number of frames of movie */
#define NVID 25          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 200    /* time after which to start saving frames */
#define COMPUTE_ENERGIES 1  /* set to 1 to compute and print energies */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.5        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

/* For debugging purposes only */
#define FLOOR 0         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

16 August 21 - Long-wavelength waves gradually destroying a randomized square grid of obstacles

Program: mangrove.c (variant of wave_billiard.c)

Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 2   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.75	    /* parameter controlling the dimensions of domain */
#define MU 0.03	            /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1    /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 1  /* set to 1 to enforce a planar wave on top and bottom boundary */
#define X_SHIFT -0.8        /* x range on which to apply OSCILLATE_TOPBOT */

#define OMEGA 0.0004        /* frequency of periodic excitation */
#define K_BC 3.0           /* spatial period of periodic excitation in y direction */
#define KX_BC 6.0           /* spatial period of periodic excitation in x direction */
#define KY_BC 2.0           /* spatial period of periodic excitation in y direction */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.005     /* Courant number in medium B */
#define GAMMA 5.0e-8          /* damping factor in wave equation */
#define GAMMAB 1.0e-5           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 3300      /* number of frames of movie */
#define NVID 40          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 125    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0      /* amplitude of variation of hue for color scheme C_HUE */

/* mangrove colors */

#define MANGROVE_HUE_MIN 180.0      /* color of original mangrove */
#define MANGROVE_HUE_MAX 0.0        /* color of saturated mangrove */
#define MANGROVE_EMAX 1.0e-3           /* max energy for mangrove to survive */
// #define MANGROVE_EMAX 1.0e-4           /* max energy for mangrove to survive */

/* For debugging purposes only */
#define FLOOR 1         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

15 August 21 - How permeable is a pinball? Particles shot at various arrangements of circles

Program: Variant of particle_billiard.c

Initial condition in function animation(): init_drop_config(-1.25, 0.0, -0.1, 0.1, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 20      /* choice of domain shape */

#define CIRCLE_PATTERN 3    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */

#define LAMBDA 0.8	/* parameter controlling shape of domain */
#define MU 0.03          /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 500        /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1    /* set to 1 to keep trails of the particles */

#define NSTEPS 1000     /* number of frames of movie */
#define TIME 1500        /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.00001    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 10      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 1  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.02      /* length of velocity vectors */
#define BILLIARD_WIDTH 2    /* width of billiard */
#define PARTICLE_WIDTH 2    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */


#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */

14 August 21 - A "golden spiral" wave protection

Program: wave_billiard.c

Initial condition in function animation(): init_planar_wave(XMIN + 0.015, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1  /* set to 1 to produce movies for wave height and energy simultaneously */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 11   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.85	    /* parameter controlling the dimensions of domain */
#define MU 0.03	            /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.01      /* Courant number in medium B */
#define GAMMA 0.0          /* damping factor in wave equation */
#define GAMMAB 1.0e-6           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 3500      /* number of frames of movie */
#define NVID 25          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 200    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

#define PLOT_B 1        /* plot type for second movie */

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

/* For debugging purposes only */
#define FLOOR 0         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

13 August 21 - Collapse of a triangle lattice wave protection under waves arriving at an angle

Program: mangrove.c (variant of wave_billiard.c)

Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 1   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.75	    /* parameter controlling the dimensions of domain */
#define MU 0.03	            /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1    /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 1  /* set to 1 to enforce a planar wave on top and bottom boundary */
#define X_SHIFT -0.8        /* x range on which to apply OSCILLATE_TOPBOT */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define K_BC 3.0           /* spatial period of periodic excitation in y direction */
#define KX_BC 30.0           /* spatial period of periodic excitation in x direction */
#define KY_BC 10.0           /* spatial period of periodic excitation in y direction */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.00666     /* Courant number in medium B */
#define GAMMA 5.0e-8          /* damping factor in wave equation */
#define GAMMAB 1.0e-5           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 6000      /* number of frames of movie */
#define NVID 20          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 250    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0      /* amplitude of variation of hue for color scheme C_HUE */

/* mangrove colors */

#define MANGROVE_HUE_MIN 180.0      /* color of original mangrove */
#define MANGROVE_HUE_MAX 0.0        /* color of saturated mangrove */
#define MANGROVE_EMAX 2.0e-3           /* max energy for mangrove to survive */

/* For debugging purposes only */
#define FLOOR 1         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */

12 August 21 - Lets play (frictionless) pinball!

Program: Variant of particle_billiard.c

Initial condition in function animation(): init_drop_config(-0.9, 0.0, 0.117, 1.0, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	720  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -1.125
#define XMAX 1.125	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 21      /* choice of domain shape */

#define CIRCLE_PATTERN 3    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 9            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */

#define LAMBDA 1.0	/* parameter controlling shape of domain */
#define MU 0.04         /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 1        /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1    /* set to 1 to keep trails of the particles */

#define NSTEPS 1150     /* number of frames of movie */
#define TIME 4000        /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.00001    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 400      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 0  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.05       /* length of velocity vectors */
#define BILLIARD_WIDTH 2    /* width of billiard */
#define PARTICLE_WIDTH 2    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */

#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */

11 August 21 - Wave protection comparison 5: Triangular vs "golden mean" lattice

Program: wave_comparison.c (variant of wave_billiard.c)

Initial condition in function animation(): init_planar_wave(XMIN + 0.00, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN_A 20      /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN_A 1     /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 10    /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.8	    /* parameter controlling the dimensions of domain */
#define MU 0.03	    /* parameter controlling the dimensions of domain */
#define MUB 0.03	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0     /* set to 1 to add oscilating boundary condition on the left */

#define OMEGA 0.0035        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 6000      /* number of frames of movie */
#define NVID 20          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 250    /* time after which to start saving frames */
#define COMPUTE_ENERGIES 1  /* set to 1 to compute and print energies */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

10 August 21 - Collapse of a "golden mean" wave protection under continuous incoming waves

Program: mangrove.c (variant of wave_billiard.c)

Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 10   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.75	    /* parameter controlling the dimensions of domain */
#define MU 0.03	            /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define K_BC 0.0           /* spatial period of periodic excitation in y direction */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.015     /* Courant number in medium B */
#define GAMMA 5.0e-8          /* damping factor in wave equation */
#define GAMMAB 1.0e-5           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 5500      /* number of frames of movie */
#define NVID 20          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 250    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0      /* amplitude of variation of hue for color scheme C_HUE */

/* mangrove colors */

#define MANGROVE_HUE_MIN 180.0      /* color of original mangrove */
#define MANGROVE_HUE_MAX 0.0        /* color of saturated mangrove */
#define MANGROVE_EMAX 1.2e-3           /* max energy for mangrove to survive */

/* For debugging purposes only */
#define FLOOR 1         /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0       /* max value of wave amplitude */


9 August 21 - Comparison between a cloaking device and a simple refracting layer

Program: wave_comparison.c (variant of wave_billiard.c)

Initial condition in function animation(): init_planar_wave(XMIN + 0.00, 0.0, phi, psi, xy_in);

Parameters in function init_planar_wave(): if ((xy_in[i][j])||(TWOSPEEDS)) phi[i][j] = 0.002*exp(-dist2/0.0005)*cos(-sqrt(dist2)/0.025);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -0.5
#define XMAX 3.5	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN_A 20      /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN_A 6    /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 98    /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.12	    /* parameter controlling the dimensions of domain */
#define MU 0.1	            /* parameter controlling the dimensions of domain */
#define MUB 0.1	    /* parameter controlling the dimensions of domain in lower panel */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 3            /* number of grid point for grid of disks */
#define NGRIDY 3           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1     /* set to 1 to add oscilating boundary condition on the left */

#define OMEGA 0.0035        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMA_SIDES 0.0      /* damping factor on boundary */
#define GAMMA_TOPBOT 0.0      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 0.0       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 0

/* Parameters for length and speed of simulation */

#define NSTEPS 1600      /* number of frames of movie */
#define NVID 20          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 30    /* time after which to start saving frames */
#define COMPUTE_ENERGIES 0  /* set to 1 to compute and print energies */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.4        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 130.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -130.0      /* amplitude of variation of hue for color scheme C_HUE */

8 August 21 - Avoiding a laser in a hexagon with teleporting walls

Program: Variant of particle_billiard.c (to be published later on)

Initial condition in function animation(): init_drop_config(x_shooter, y_shooter, 0.0, DPI, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -1.3
#define XMAX 2.7	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 22      /* choice of domain shape */

#define CIRCLE_PATTERN 12    /* pattern of circles */

#define ABSORBING_CIRCLES 1 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */

#define LAMBDA 1.0	/* parameter controlling shape of billiard */
#define MU 0.015          /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 6             /* number of sides of polygon */
#define APOLY 0.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 5000       /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0    /* set to 1 to keep trails of the particles */
#define SHOWZOOM 1      /* set to 1 to show a zoom (for laser in room of mirrors) */
#define PRINT_PARTICLE_NUMBER 1 /* set to 1 to print number of non-absorbed particles */

#define NSTEPS 9500     /* number of frames of movie */
#define TIME 1500       /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.000005    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 12      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 1  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.02      /* length of velocity vectors */
#define BILLIARD_WIDTH 6    /* width of billiard */
#define PARTICLE_WIDTH 2    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */


#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */

7 August 21 - Wave protection comparison 4: randomized square grid vs Poisson process

Program: wave_comparison.c (variant of wave_billiard.c)

Initial condition in function animation(): nit_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN_A 20      /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN_A 2    /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 4    /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.85	    /* parameter controlling the dimensions of domain */
#define MU 0.03	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */

#define OMEGA 0.9           /* frequency of periodic excitation */
#define COURANT 0.01       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 5500      /* number of frames of movie */
#define NVID 40          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 250    /* time after which to start saving frames */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

6 August 21 - A wave protection based on the golden mean

Program: wave_billiard.c

Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

/* setting NX to WINWIDTH and NY to WINHEIGHT increases resolution */
/* but will multiply run time by 4                                 */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 10    /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.75	    /* parameter controlling the dimensions of domain */
#define MU 0.03	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */

#define OMEGA 0.9           /* frequency of periodic excitation */
#define COURANT 0.01       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 4500      /* number of frames of movie */
#define NVID 40          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 250    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 2

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

5 August 21 - Reflecting stoppers won't protect you in a laser fight

Program: Variant of particle_billiard.c (to be published later on)

Initial condition in function animation(): init_drop_config(x_shooter, y_shooter, 0.0, DPI, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	720  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -1.125
#define XMAX 1.125	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */

/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 21      /* choice of domain shape */

#define CIRCLE_PATTERN 11    /* pattern of circles */

#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */

#define LAMBDA 1.0	/* parameter controlling shape of billiard */
#define MU 0.015          /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 8             /* number of sides of polygon */
#define APOLY 0.25           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 5000       /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0    /* set to 1 to keep trails of the particles */
#define SHOWZOOM 0      /* set to 1 to show a zoom (for laser in room of mirrors) */

#define NSTEPS 1350     /* number of frames of movie */
#define TIME 1500       /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.000005    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 32      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 1  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.02      /* length of velocity vectors */
#define BILLIARD_WIDTH 6    /* width of billiard */
#define PARTICLE_WIDTH 2    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */


#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */

4 August 21 - Refraction of a wave on a horizontal ellipse

Program: wave_billiard.c

Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 1      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 6    /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 1.5	    /* parameter controlling the dimensions of domain */
#define MU 0.005	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */

#define OMEGA 0.9           /* frequency of periodic excitation */
#define COURANT 0.0075      /* Courant number in medium B */
#define COURANTB 0.01       /* Courant number */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 2

/* Parameters for length and speed of simulation */

#define NSTEPS 4500      /* number of frames of movie */
#define NVID 40          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 100    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

3 August 21 - Wave protection comparison 3: regular vs random square grid

Program: wave_comparison.c (variant of wave_billiard.c)

Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

/* setting NX to WINWIDTH and NY to WINHEIGHT increases resolution */
/* but will multiply run time by 4                                 */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN_A 20      /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN_A 0    /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 2    /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.75	    /* parameter controlling the dimensions of domain */
#define MU 0.03	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */

#define OMEGA 0.9           /* frequency of periodic excitation */
#define COURANT 0.01       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 3000      /* number of frames of movie */
#define NVID 40          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 250    /* time after which to start saving frames */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 1

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

2 August 21 - Avoiding a laser in a room of mirrors, long version with close-up and particle counter

Program: Variant of particle_billiard.c (to be published later on)

Initial condition in function animation(): init_drop_config(x_shooter, y_shooter, 0.0, DPI, configs);

#define MOVIE 1         /* set to 1 to generate movie */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define XMIN -1.3
#define XMAX 2.7	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define SCALING_FACTOR 1.0       /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */


/* Choice of the billiard table, see global_particles.c */

#define B_DOMAIN 21      /* choice of domain shape */

#define CIRCLE_PATTERN 11    /* pattern of circles */

#define ABSORBING_CIRCLES 1 /* set to 1 for circular scatterers to be absorbing */

#define NMAXCIRCLES 1000        /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15            /* number of circles in x direction */
#define NCY 20            /* number of circles in y direction */

#define LAMBDA 1.0	/* parameter controlling shape of billiard */
#define MU 0.015          /* second parameter controlling shape of billiard */
#define FOCI 1          /* set to 1 to draw focal points of ellipse */
#define NPOLY 8             /* number of sides of polygon */
#define APOLY 0.25           /* angle by which to turn polygon, in units of Pi/2 */ 
#define DRAW_BILLIARD 1     /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1   /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0       /* set to 1 to enforce periodic boundary conditions when drawing particles */

#define RESAMPLE 0      /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0         /* draw trajectories, for debugging purposes */

/* Simulation parameters */

#define NPART 5000       /* number of particles */
#define NPARTMAX 100000	/* maximal number of particles after resampling */
#define LMAX 0.01       /* minimal segment length triggering resampling */ 
#define DMIN 0.02       /* minimal distance to boundary for triggering resampling */ 
#define CYCLE 1         /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0    /* set to 1 to keep trails of the particles */
#define SHOWZOOM 1      /* set to 1 to show a zoom (for laser in room of mirrors) */

#define NSTEPS 8000     /* number of frames of movie */
#define TIME 1500       /* time between movie frames, for fluidity of real-time simulation */ 
#define DPHI 0.000005    /* integration step */
#define NVID 150         /* number of iterations between images displayed on screen */

/* Decreasing TIME accelerates the animation and the movie                               */
/* For constant speed of movie, TIME*DPHI should be kept constant                        */
/* However, increasing DPHI too much deterioriates quality of simulation                 */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100    */

/* Colors and other graphical parameters */

#define NCOLORS 32      /* number of colors */
#define COLORSHIFT 0     /* hue of initial color */ 
#define RAINBOW_COLOR 1  /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0   /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100         /* number of segments of boundary */
#define LENGTH 0.02      /* length of velocity vectors */
#define BILLIARD_WIDTH 6    /* width of billiard */
#define PARTICLE_WIDTH 2    /* width of particles */
#define FRONT_WIDTH 3       /* width of wave front */

#define BLACK 1             /* set to 1 for black background */
#define COLOR_OUTSIDE 0     /* set to 1 for colored outside */ 
#define OUTER_COLOR 270.0   /* color outside billiard */
#define PAINT_INT 0         /* set to 1 to paint interior in other color (for polygon/Reuleaux) */


#define PAUSE 1000       /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1000      /* final sleeping time */

1 August 21 - A cloaking device, optimized version with longer wavelength

Program: wave_billiard.c

Initial condition in function animation(): init_planar_wave(XMIN + 0.00, 0.0, phi, psi, xy_in);

Parameters in init_planar_wave(): if ((xy_in[i][j])||(TWOSPEEDS)) phi[i][j] = 0.01*exp(-dist2/0.05)*cos(-sqrt(dist2)/0.025);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -1.0
#define XMAX 3.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 6    /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.2	    /* parameter controlling the dimensions of domain */
#define MU 0.005	    /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000      /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0     /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15            /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 0         /* set to 1 to replace hardcore boundary by medium with different speed */

#define OMEGA 0.9           /* frequency of periodic excitation */
#define COURANT 0.01       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 2

/* Parameters for length and speed of simulation */

#define NSTEPS 3500      /* number of frames of movie */
#define NVID 40          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 30    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0      /* amplitude of variation of hue for color scheme C_HUE */

Unpublished - Continuously oscillating plane waves hitting a "golden mean" wave protection

Program: wave_billiard.c

Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -2.0
#define XMAX 2.0	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20      /* choice of domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 10   /* pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.75	    /* parameter controlling the dimensions of domain */
#define MU 0.03	            /* parameter controlling the dimensions of domain */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1         /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.002        /* frequency of periodic excitation */
#define AMPLITUDE 1.0      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
#define COURANTB 0.01      /* Courant number in medium B */
#define GAMMA 0.0          /* damping factor in wave equation */
#define GAMMAB 1.0e-6           /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4      /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6     /* damping factor on boundary */
#define KAPPA 0.0           /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4  /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0    /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 3

/* Parameters for length and speed of simulation */

#define NSTEPS 5000      /* number of frames of movie */
#define NVID 20          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 250    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 2.0        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0      /* amplitude of variation of hue for color scheme C_HUE */

Unpublished - Cloaking device comparison with longer wavelength

Program: wave_comparison.c (variant of wave_billiard.c)

Initial condition in function animation(): init_planar_wave(XMIN + 0.00, 0.0, phi, psi, xy_in);

#define MOVIE 1         /* set to 1 to generate movie */

/* General geometrical parameters */

#define WINWIDTH 	1280  /* window width */
#define WINHEIGHT 	720   /* window height */

#define NX 1280          /* number of grid points on x axis */
#define NY 720          /* number of grid points on y axis */

#define XMIN -0.5
#define XMAX 3.5	/* x interval */
#define YMIN -1.125
#define YMAX 1.125	/* y interval for 9/16 aspect ratio */

#define JULIA_SCALE 1.0 /* scaling for Julia sets */

/* Choice of the billiard table */

#define B_DOMAIN 20        /* choice of top domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20      /* choice of bottom domain shape, see list in global_pdes.c */

#define CIRCLE_PATTERN 6       /* top pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 98    /* bottom pattern of circles, see list in global_pdes.c */

#define P_PERCOL 0.25       /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300        /* number of points for Poisson C_RAND_POISSON arrangement */

#define LAMBDA 0.12	    /* parameter controlling the dimensions of domain */
#define MU 0.1	            /* parameter controlling the dimensions of domain */
#define MUB 0.1	            /* parameter controlling the dimensions of domain in bottom panel */
#define NPOLY 3             /* number of sides of polygon */
#define APOLY 1.0           /* angle by which to turn polygon, in units of Pi/2 */ 
#define MDEPTH 4            /* depth of computation of Menger gasket */
#define MRATIO 3            /* ratio defining Menger gasket */
#define MANDELLEVEL 1000    /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0    /* limit value for approximation of Mandelbrot set */
#define FOCI 1              /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15           /* number of grid point for grid of disks */
#define NGRIDY 20           /* number of grid point for grid of disks */

/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */

/* Physical parameters of wave equation */

#define TWOSPEEDS 1          /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1     /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 1   /* set to 1 to enforce a planar wave on top and bottom boundary */

#define OMEGA 0.0035        /* frequency of periodic excitation */
#define AMPLITUDE 1.5      /* amplitude of periodic excitation */ 
#define COURANT 0.02       /* Courant number */
// #define COURANT 0.01       /* Courant number */
#define COURANTB 0.0075      /* Courant number in medium B */
#define GAMMA 0.0      /* damping factor in wave equation */
#define GAMMA_SIDES 0.0      /* damping factor on boundary */
#define GAMMA_TOPBOT 0.0      /* damping factor on boundary */
#define KAPPA 0.0       /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 0.0       /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0       /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */

/* Boundary conditions, see list in global_pdes.c  */

#define B_COND 0

/* Parameters for length and speed of simulation */

#define NSTEPS 1600      /* number of frames of movie */
#define NVID 20          /* number of iterations between images displayed on screen */
// #define NVID 40          /* number of iterations between images displayed on screen */
#define NSEG 100         /* number of segments of boundary */
#define INITIAL_TIME 25    /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2    /* width of billiard boundary */
#define COMPUTE_ENERGIES 0  /* set to 1 to compute and print energies */

#define PAUSE 1000         /* number of frames after which to pause */
#define PSLEEP 1         /* sleep time during pause */
#define SLEEP1  1        /* initial sleeping time */
#define SLEEP2  1   /* final sleeping time */

/* Plot type, see list in global_pdes.c  */

#define PLOT 0

/* Color schemes */

#define BLACK 1          /* background */

#define COLOR_SCHEME 1   /* choice of color scheme, see list in global_pdes.c  */

#define SCALE 0          /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.4        /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0  /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0     /* scaling factor for energy representation */

#define COLORHUE 260     /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0   /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5      /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3       /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 130.0    /* mean value of hue for color scheme C_HUE */
#define HUEAMP -130.0      /* amplitude of variation of hue for color scheme C_HUE */