YouTube-simulations/Parameters_May22.md
2022-06-25 15:51:53 +02:00

7321 lines
378 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

### Parameter values for YouTube simulations ###
Created by **Nils Berglund** and optimized by **Marco Mancini**
C code for videos on YouTube Channel https://www.youtube.com/c/NilsBerglund
Below are parameter values used for different simulations, as well as initial conditions used in
function animation. Some simulations use variants of the published code. The list is going to be
updated gradually.
### 31 May 22 - Lennard-Jones particles with Rock-Paper-Scissors dynamics, with an improved rendering ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 0 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -1.95
#define INITXMAX 1.95 /* x interval for initial condition */
#define INITYMIN -1.05
#define INITYMAX 1.05 /* y interval for initial condition */
#define BCXMIN -2.0
#define BCXMAX 2.0 /* x interval for boundary condition */
#define BCYMIN -1.125
#define BCYMAX 1.125 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 0 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 5 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.7 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 3.0 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.7 /* parameter controlling the dimensions of domain */
#define MU 0.012 /* parameter controlling radius of particles */
#define MU_B 0.018 /* parameter controlling radius of particles of second type */
#define NPOLY 18 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 4000 /* number of frames of movie */
#define NVID 80 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 3
/* Plot type, see list in global_ljones.c */
#define PLOT 5
#define PLOT_B 9 /* plot type for second movie */
#define DRAW_BONDS 1 /* set to 1 to draw bonds between neighbours */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
#define FILL_TRIANGLES 1 /* set to 1 to fill triangles between neighbours */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 1.0e3 /* energy of particle with hottest color */
#define HUE_TYPE0 280.0 /* hue of particles of type 0 */
#define HUE_TYPE1 180.0 /* hue of particles of type 1 */
#define HUE_TYPE2 70.0 /* hue of particles of type 2 */
#define HUE_TYPE3 210.0 /* hue of particles of type 3 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 3.0e-6 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.0 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 3.5 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 1.0e-1 /* damping coefficient of particles */
#define PARTICLE_MASS 4.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define VARY_THERMOSTAT 0 /* set to 1 for time-dependent thermostat schedule */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 10.0 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 1.0e11 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 1.0e11 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 6.0 /* radius in which to count neighbours */
#define GRAVITY 0.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 100.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 1 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 0.002 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 0 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_REGION 1 /* region for partial thermostat coupling (see list in global_ljones.c) */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define ROTATE_BOUNDARY 0 /* set to 1 to rotate the repelling segments */
#define SMOOTH_ROTATION 1 /* set to 1 to update segments at each time step (rather than at each movie frame) */
#define PERIOD_ROTATE_BOUNDARY 500 /* period of rotating boundary */
#define ROTATE_INITIAL_TIME 100 /* initial time without rotation */
#define ROTATE_FINAL_TIME 365 /* final time without rotation */
#define PRINT_OMEGA 0 /* set to 1 to print angular speed */
#define PRINT_PARTICLE_SPEEDS 0 /* set to 1 to print average speeds/momenta of particles */
#define MOVE_BOUNDARY 0 /* set to 1 to move repelling segments, due to force from particles */
#define SEGMENTS_MASS 100.0 /* mass of collection of segments */
#define DEACTIVATE_SEGMENT 0 /* set to 1 to deactivate last segment after a certain time */
#define SEGMENT_DEACTIVATION_TIME 1000 /* time at which to deactivate last segment */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define REACTION_DIFFUSION 1 /* set to 1 to simulate a chemical reaction (particles may change type) */
#define RD_TYPES 3 /* number of types in reaction-diffusion equation */
#define REACTION_PROB 0.0045 /* probability controlling reaction term */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define PRINT_LEFT 1 /* set to 1 to print certain parameters at the top left instead of right */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e12 /* maximal force */
#define FLOOR_OMEGA 0 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 80 /* size of hashgrid in x direction */
#define HASHY 40 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 30 May 22 - The effect of noise on spirals in the Rock-Paper-Scissors equations ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_random(0.5, 0.4, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1920 /* number of grid points on x axis */
#define NY 1000 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 4 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 3 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 3 /* number of fields for which to compute Laplacian */
#define ADD_POTENTIAL 0 /* set to 1 to add a potential (for Schrodiner equation) */
#define POTENTIAL 1 /* type of potential, see list in global_3d.c */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 999 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.8 /* parameter controlling the dimensions of domain */
#define MU 0.07 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.0000003
#define VISCOSITY 2.0
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define RPSLZB 0.75 /* second parameter in Rock-Paper-Scissors-Lizard-Spock type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define K_HARMONIC 1.5 /* spring constant of harmonic potential */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 2 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.005 /* noise intensity */
#define CHANGE_NOISE 1 /* set to 1 to increase noise intensity */
#define NOISE_FACTOR 40.0 /* factor by which to increase noise intensity */
#define NOISE_INITIAL_TIME 100 /* initial time during which noise remains constant */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 0 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
#define CHANGE_RPSLZB 0 /* set to 1 to change second parameter in Rock-Paper-Scissors-Lizard-Spock equation */
#define RPSLZB_CHANGE 0.75 /* factor by which to rpslzb parameter */
#define RPSLZB_INITIAL_TIME 0 /* initial time during which rpslzb remains constant */
#define RPSLZB_FINAL_TIME 500 /* final time during which rpslzb remains constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 2000 /* number of frames of movie */
#define NVID 8 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 4 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 50 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 0 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 22
#define CPLOT_B 251
/* Plot type - height of 3D plot */
#define ZPLOT 25 /* z coordinate in 3D plot */
#define ZPLOT_B 25 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define DRAW_OUTSIDE_GRAY 1 /* experimental - draw outside of billiard in gray */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define PRINT_RPSLZB 0 /* set to 1 to print rpslzb parameter */
#define PRINT_PROBABILITIES 0 /* set to 1 to print probabilities (for Ehrenfest urn configuration) */
#define PRINT_NOISE 1 /* set to 1 to print noise intensity */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 17 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 13 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.15 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 1.75 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.00003 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 3.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.035 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.0 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 2.0 /* max value of wave amplitude */
```
### 29 May 22 - A quantum Ehrenfest model in 3D, shooting straight at the channel ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_coherent_state(-1.0, 0.0, 20.0, 0.0, 0.15, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 480 /* number of grid points on x axis */
#define NY 250 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 5 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 2 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 2 /* number of fields for which to compute Laplacian */
#define ADD_POTENTIAL 0 /* set to 1 to add a potential (for Schrodiner equation) */
#define POTENTIAL 1 /* type of potential, see list in global_3d.c */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 11 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.8 /* parameter controlling the dimensions of domain */
#define MU 0.07 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.00000002
#define VISCOSITY 1.0
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define RPSLZB 0.75 /* second parameter in Rock-Paper-Scissors-Lizard-Spock type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define K_HARMONIC 1.5 /* spring constant of harmonic potential */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 0 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
#define CHANGE_RPSLZB 0 /* set to 1 to change second parameter in Rock-Paper-Scissors-Lizard-Spock equation */
#define RPSLZB_CHANGE 0.75 /* factor by which to rpslzb parameter */
#define RPSLZB_INITIAL_TIME 0 /* initial time during which rpslzb remains constant */
#define RPSLZB_FINAL_TIME 500 /* final time during which rpslzb remains constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 1900 /* number of frames of movie */
#define NVID 750 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 4 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 50 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 1 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 30
#define CPLOT_B 31
/* Plot type - height of 3D plot */
#define ZPLOT 30 /* z coordinate in 3D plot */
#define ZPLOT_B 30 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define DRAW_OUTSIDE_GRAY 1 /* experimental - draw outside of billiard in gray */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define PRINT_RPSLZB 0 /* set to 1 to print rpslzb parameter */
#define PRINT_PROBABILITIES 1 /* set to 1 to print probabilities (for Ehrenfest urn configuration) */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 16 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 17 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 10.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 3.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.5 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.0 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 28 May 22 - How to make a rocket with Lennard-Jones particles ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -0.7
#define INITXMAX 0.7 /* x interval for initial condition */
#define INITYMIN -0.5
#define INITYMAX 0.5 /* y interval for initial condition */
#define BCXMIN -2.0
#define BCXMAX 5.0 /* x interval for boundary condition */
#define BCYMIN -1.6
#define BCYMAX 1.6 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 1 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 5 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.7 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 3.33 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.7 /* parameter controlling the dimensions of domain */
#define MU 0.012 /* parameter controlling radius of particles */
#define MU_B 0.018 /* parameter controlling radius of particles of second type */
#define NPOLY 18 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 2000 /* number of frames of movie */
#define NVID 500 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 50 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 3
/* Plot type, see list in global_ljones.c */
#define PLOT 0
#define PLOT_B 8 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 1.0e3 /* energy of particle with hottest color */
#define HUE_TYPE0 45.0 /* hue of particles of type 0 */
#define HUE_TYPE1 300.0 /* hue of particles of type 1 */
#define HUE_TYPE2 300.0 /* hue of particles of type 2 */
#define HUE_TYPE3 300.0 /* hue of particles of type 3 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 2.0e-6 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.5 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 3.5 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 1.0e-1 /* damping coefficient of particles */
#define PARTICLE_MASS 4.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define VARY_THERMOSTAT 0 /* set to 1 for time-dependent thermostat schedule */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.02 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 1.0e11 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 1.0e11 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.0 /* radius in which to count neighbours */
#define GRAVITY 0.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 100.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 1 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 0.025 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 1000 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 1 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_REGION 1 /* region for partial thermostat coupling (see list in global_ljones.c) */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define ROTATE_BOUNDARY 0 /* set to 1 to rotate the repelling segments */
#define SMOOTH_ROTATION 1 /* set to 1 to update segments at each time step (rather than at each movie frame) */
#define PERIOD_ROTATE_BOUNDARY 500 /* period of rotating boundary */
#define ROTATE_INITIAL_TIME 100 /* initial time without rotation */
#define ROTATE_FINAL_TIME 365 /* final time without rotation */
#define PRINT_OMEGA 0 /* set to 1 to print angular speed */
#define PRINT_PARTICLE_SPEEDS 0 /* set to 1 to print average speeds/momenta of particles */
#define MOVE_BOUNDARY 1 /* set to 1 to move repelling segments, due to force from particles */
#define SEGMENTS_MASS 100.0 /* mass of collection of segments */
#define DEACTIVATE_SEGMENT 1 /* set to 1 to deactivate last segment after a certain time */
#define SEGMENT_DEACTIVATION_TIME 1000 /* time at which to deactivate last segment */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define REACTION_DIFFUSION 0 /* set to 1 to simulate a chemical reaction (particles may change type) */
#define RD_TYPES 3 /* number of types in reaction-diffusion equation */
#define REACTION_PROB 0.03 /* probability controlling reaction term */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define PRINT_LEFT 1 /* set to 1 to print certain parameters at the top left instead of right */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e12 /* maximal force */
#define FLOOR_OMEGA 0 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 100 /* size of hashgrid in x direction */
#define HASHY 40 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 27 May 22 - Waves radiating from the Mandelbrot set: Index of refraction increasiing with decreasing escape time ###
**Program:** `wave_3d.c`
**Initial condition in function `animation()`:** `init_circular_wave_mod(0.0, 0.0, phi, psi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1800 /* number of grid points on x axis */
#define NY 900 /* number of grid points on y axis */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
#define HIGHRES 0 /* set to 1 if resolution of grid is double that of displayed image */
#define XMIN -2.5
#define XMAX 1.5 /* x interval */
#define JULIA_SCALE 0.8 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 24 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 202 /* pattern of circles or polygons, see list in global_pdes.c */
#define VARIABLE_IOR 1 /* set to 1 for a variable index of refraction */
#define IOR 1 /* choice of index of refraction, see list in global_pdes.c */
#define MANDEL_IOR_SCALE -0.05 /* parameter controlling dependece of IoR on Mandelbrot escape speed */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.5 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 36 /* number of grid point for grid of disks */
#define NGRIDY 6 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -2.9
#define ISO_XSHIFT_RIGHT 1.4
#define ISO_YSHIFT_LEFT -0.15
#define ISO_YSHIFT_RIGHT -0.15
#define ISO_SCALE 0.5 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.017 /* frequency of periodic excitation */
#define AMPLITUDE 0.9 /* amplitude of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.025 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 1.0e-6 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
#define ADD_OSCILLATING_SOURCE 0 /* set to 1 to add an oscillating wave source */
#define OSCILLATING_SOURCE_PERIOD 30 /* period of oscillating source */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 2000 /* number of frames of movie */
#define NVID 6 /* number of iterations between images displayed on screen */
#define NSEG 1000 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 100 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
/* Parameters of initial condition */
#define INITIAL_AMP 0.75 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0003 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.02 /* wavelength of initial condition */
/* Plot type, see list in global_pdes.c */
#define ZPLOT 108 /* wave height */
#define CPLOT 108 /* color scheme */
#define ZPLOT_B 109
#define CPLOT_B 109 /* plot type for second movie */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define FLOOR_ZCOORD 1 /* set to 1 to draw only facets with z not too negative */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 0 /* set to 1 to draw front of boundary after drawing wave */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw construction lines of certain domains */
#define FADE_IN_OBSTACLE 1 /* set to 1 to fade color inside obstacles */
#define DRAW_OUTSIDE_GRAY 0 /* experimental, draw outside of billiard in gray */
#define PLOT_SCALE_ENERGY 0.02 /* vertical scaling in energy plot */
#define PLOT_SCALE_LOG_ENERGY 1.0 /* vertical scaling in log energy plot */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes */
#define COLOR_PALETTE 16 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 13 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 2.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 1.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define VSCALE_ENERGY 7.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define LOG_SCALE 0.2 /* scaling factor for energy log representation */
#define LOG_SHIFT -0.5 /* shift of colors on log scale */
#define LOG_ENERGY_FLOOR -1000.0 /* floor value for log of (total) energy */
#define LOG_MEAN_ENERGY_SHIFT 5.0 /* additional shift for log of mean energy */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -200.0 /* amplitude of variation of hue for color scheme C_HUE */
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 15.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 50.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
#define SAVE_TIME_SERIES 0 /* set to 1 to save wave time series at a point */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters controlling 3D projection */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {6.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.05 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D -0.1 /* overall y shift for REP_PROJ_3D representation */
```
### 26 May 22 - An almost coherent state of the 2D quantum harmonic oscillator ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_coherent_state(-0.75, 0.0, 5.0, -7.0, 0.2, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 480 /* number of grid points on x axis */
#define NY 250 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 5 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 2 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 2 /* number of fields for which to compute Laplacian */
#define ADD_POTENTIAL 1 /* set to 1 to add a potential (for Schrodiner equation) */
#define POTENTIAL 1 /* type of potential, see list in global_3d.c */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 999 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.8 /* parameter controlling the dimensions of domain */
#define MU 0.1 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.00000001
#define VISCOSITY 1.0
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define RPSLZB 0.75 /* second parameter in Rock-Paper-Scissors-Lizard-Spock type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define K_HARMONIC 1.5 /* spring constant of harmonic potential */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 0 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
#define CHANGE_RPSLZB 0 /* set to 1 to change second parameter in Rock-Paper-Scissors-Lizard-Spock equation */
#define RPSLZB_CHANGE 0.75 /* factor by which to rpslzb parameter */
#define RPSLZB_INITIAL_TIME 0 /* initial time during which rpslzb remains constant */
#define RPSLZB_FINAL_TIME 500 /* final time during which rpslzb remains constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 1500 /* number of frames of movie */
#define NVID 1200 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 4 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 50 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 1 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 30
#define CPLOT_B 31
/* Plot type - height of 3D plot */
#define ZPLOT 30 /* z coordinate in 3D plot */
#define ZPLOT_B 30 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define DRAW_OUTSIDE_GRAY 1 /* experimental - draw outside of billiard in gray */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define PRINT_RPSLZB 0 /* set to 1 to print rpslzb parameter */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 11 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 10 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 10.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 5.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.5 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.0 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 25 May 22 - A faster-rotating hourglass with Lennard-Jones particles ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -0.7
#define INITXMAX 0.7 /* x interval for initial condition */
#define INITYMIN 0.1
#define INITYMAX 0.6 /* y interval for initial condition */
#define BCXMIN -0.7
#define BCXMAX 0.7 /* x interval for boundary condition */
#define BCYMIN -0.85
#define BCYMAX 0.85 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 1 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 2 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.7 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 2.75 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.013 /* parameter controlling radius of particles */
#define MU_B 0.018 /* parameter controlling radius of particles of second type */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 1915 /* number of frames of movie */
#define NVID 3250 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 0
/* Plot type, see list in global_ljones.c */
#define PLOT 0
#define PLOT_B 8 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 2.0e2 /* energy of particle with hottest color */
#define HUE_TYPE0 45.0 /* hue of particles of type 0 */
#define HUE_TYPE1 300.0 /* hue of particles of type 1 */
#define HUE_TYPE2 300.0 /* hue of particles of type 2 */
#define HUE_TYPE3 300.0 /* hue of particles of type 3 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 5.0e-7 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.5 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 3.5 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 1.0e2 /* damping coefficient of particles */
#define PARTICLE_MASS 5.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define VARY_THERMOSTAT 0 /* set to 1 for time-dependent thermostat schedule */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.01 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 1.0e11 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 1.0e11 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.0 /* radius in which to count neighbours */
#define GRAVITY 50000.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 100.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 0 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 0.02 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 0 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define ROTATE_BOUNDARY 1 /* set to 1 to rotate the repelling segments */
#define SMOOTH_ROTATION 1 /* set to 1 to update segments at each time step (rather than at each movie frame) */
#define PERIOD_ROTATE_BOUNDARY 500 /* period of rotating boundary */
#define ROTATE_INITIAL_TIME 50 /* initial time without rotation */
#define ROTATE_FINAL_TIME 365 /* final time without rotation */
#define PRINT_OMEGA 0 /* set to 1 to print angular speed */
#define PRINT_PARTICLE_SPEEDS 1 /* set to 1 to print average speeds/momenta of particles */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define REACTION_DIFFUSION 0 /* set to 1 to simulate a chemical reaction (particles may change type) */
#define RD_TYPES 3 /* number of types in reaction-diffusion equation */
#define REACTION_PROB 0.03 /* probability controlling reaction term */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e12 /* maximal force */
#define FLOOR_OMEGA 0 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 40 /* size of hashgrid in x direction */
#define HASHY 20 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 24 May 22 - Waves radiating from the Mandelbrot set: Index of refraction decreasing with escape time ###
**Program:** `wave_3d.c`
**Initial condition in function `animation()`:** `init_circular_wave_mod(0.0, 0.0, phi, psi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1800 /* number of grid points on x axis */
#define NY 900 /* number of grid points on y axis */
#define HIGHRES 0 /* set to 1 if resolution of grid is double that of displayed image */
#define XMIN -2.5
#define XMAX 1.5 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 0.8 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 24 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 202 /* pattern of circles or polygons, see list in global_pdes.c */
#define VARIABLE_IOR 1 /* set to 1 for a variable index of refraction */
#define IOR 1 /* choice of index of refraction, see list in global_pdes.c */
#define MANDEL_IOR_SCALE 0.02 /* parameter controlling dependece of IoR on Mandelbrot escape speed */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.5 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 36 /* number of grid point for grid of disks */
#define NGRIDY 6 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -2.9
#define ISO_XSHIFT_RIGHT 1.4
#define ISO_YSHIFT_LEFT -0.15
#define ISO_YSHIFT_RIGHT -0.15
#define ISO_SCALE 0.5 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.017 /* frequency of periodic excitation */
#define AMPLITUDE 0.9 /* amplitude of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.025 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 1.0e-6 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
#define ADD_OSCILLATING_SOURCE 0 /* set to 1 to add an oscillating wave source */
#define OSCILLATING_SOURCE_PERIOD 30 /* period of oscillating source */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 1600 /* number of frames of movie */
#define NVID 6 /* number of iterations between images displayed on screen */
#define NSEG 1000 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 100 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
/* Parameters of initial condition */
#define INITIAL_AMP 0.75 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0003 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.02 /* wavelength of initial condition */
/* Plot type, see list in global_pdes.c */
#define ZPLOT 108 /* wave height */
#define CPLOT 108 /* color scheme */
#define ZPLOT_B 109
#define CPLOT_B 109 /* plot type for second movie */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define FLOOR_ZCOORD 1 /* set to 1 to draw only facets with z not too negative */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 0 /* set to 1 to draw front of boundary after drawing wave */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw construction lines of certain domains */
#define FADE_IN_OBSTACLE 1 /* set to 1 to fade color inside obstacles */
#define DRAW_OUTSIDE_GRAY 0 /* experimental, draw outside of billiard in gray */
#define PLOT_SCALE_ENERGY 0.02 /* vertical scaling in energy plot */
#define PLOT_SCALE_LOG_ENERGY 1.0 /* vertical scaling in log energy plot */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes */
#define COLOR_PALETTE 11 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 12 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 2.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 1.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define VSCALE_ENERGY 10.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define LOG_SCALE 0.2 /* scaling factor for energy log representation */
#define LOG_SHIFT -0.5 /* shift of colors on log scale */
#define LOG_ENERGY_FLOOR -1000.0 /* floor value for log of (total) energy */
#define LOG_MEAN_ENERGY_SHIFT 5.0 /* additional shift for log of mean energy */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -200.0 /* amplitude of variation of hue for color scheme C_HUE */
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 15.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 50.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
#define SAVE_TIME_SERIES 0 /* set to 1 to save wave time series at a point */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters controlling 3D projection */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {6.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.07 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D -0.1 /* overall y shift for REP_PROJ_3D representation */
```
### 23 May 22 - A quantum Ehrenfest model, in 3D ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_coherent_state(-1.0, 0.0, 20.0, -5.0, 0.15, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 600 /* number of grid points on x axis */
#define NY 300 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 5 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 2 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 2 /* number of fields for which to compute Laplacian */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 11 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.8 /* parameter controlling the dimensions of domain */
#define MU 0.1 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.00000002
#define VISCOSITY 1.0
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define RPSLZB 0.75 /* second parameter in Rock-Paper-Scissors-Lizard-Spock type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 0 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
#define CHANGE_RPSLZB 0 /* set to 1 to change second parameter in Rock-Paper-Scissors-Lizard-Spock equation */
#define RPSLZB_CHANGE 0.75 /* factor by which to rpslzb parameter */
#define RPSLZB_INITIAL_TIME 0 /* initial time during which rpslzb remains constant */
#define RPSLZB_FINAL_TIME 500 /* final time during which rpslzb remains constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 2500 /* number of frames of movie */
#define NVID 500 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 4 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 50 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 1 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 30
#define CPLOT_B 31
/* Plot type - height of 3D plot */
#define ZPLOT 30 /* z coordinate in 3D plot */
#define ZPLOT_B 30 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define DRAW_OUTSIDE_GRAY 1 /* experimental - draw outside of billiard in gray */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define PRINT_RPSLZB 0 /* set to 1 to print rpslzb parameter */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 14 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 10 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 35.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 2.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 1.0 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.0 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 22 May 22 - A centrifuge without thermostat, and without gravity ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -0.65
#define INITXMAX 0.65 /* x interval for initial condition */
#define INITYMIN -0.65
#define INITYMAX 0.65 /* y interval for initial condition */
#define BCXMIN -2.0
#define BCXMAX 2.0 /* x interval for boundary condition */
#define BCYMIN -1.125
#define BCYMAX 1.125 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 1 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 4 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 1 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.7 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 3.75 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.05 /* parameter controlling the dimensions of domain */
#define MU 0.012 /* parameter controlling radius of particles */
#define MU_B 0.018 /* parameter controlling radius of particles of second type */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 3850 /* number of frames of movie */
#define NVID 300 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 100 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 3
/* Plot type, see list in global_ljones.c */
#define PLOT 5
#define PLOT_B 8 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 2.0e2 /* energy of particle with hottest color */
#define HUE_TYPE0 45.0 /* hue of particles of type 0 */
#define HUE_TYPE1 300.0 /* hue of particles of type 1 */
#define HUE_TYPE2 300.0 /* hue of particles of type 2 */
#define HUE_TYPE3 300.0 /* hue of particles of type 3 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 1.0e-6 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.5 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 3.5 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 1.0e2 /* damping coefficient of particles */
#define PARTICLE_MASS 5.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define VARY_THERMOSTAT 1 /* set to 1 for time-dependent thermostat schedule */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.1 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 1.0e11 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 1.0e11 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.0 /* radius in which to count neighbours */
#define GRAVITY 0.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 100.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 0 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 0.02 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 0 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define ROTATE_BOUNDARY 1 /* set to 1 to rotate the repelling segments */
#define SMOOTH_ROTATION 1 /* set to 1 to update segments at each time step (rather than at each movie frame) */
#define PERIOD_ROTATE_BOUNDARY 3350 /* period of rotating boundary */
#define ROTATE_INITIAL_TIME 0 /* initial time without rotation */
#define ROTATE_FINAL_TIME 500 /* final time without rotation */
#define PRINT_OMEGA 1 /* set to 1 to print angular speed */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define REACTION_DIFFUSION 0 /* set to 1 to simulate a chemical reaction (particles may change type) */
#define RD_TYPES 3 /* number of types in reaction-diffusion equation */
#define REACTION_PROB 0.03 /* probability controlling reaction term */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e12 /* maximal force */
#define FLOOR_OMEGA 0 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 40 /* size of hashgrid in x direction */
#define HASHY 20 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 21 May 22 - Transition from 3-branched to 5-branched spirals in the Rock-Paper-Scissors-Lizard-Spock equation ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_random(0.5, 0.4, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1920 /* number of grid points on x axis */
#define NY 1000 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 41 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 5 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 5 /* number of fields for which to compute Laplacian */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 1.5 /* parameter controlling the dimensions of domain */
#define MU 0.06 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.0000005
#define VISCOSITY 1.0
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define RPSLZB 0.75 /* second parameter in Rock-Paper-Scissors-Lizard-Spock type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 0 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
#define CHANGE_RPSLZB 1 /* set to 1 to change second parameter in Rock-Paper-Scissors-Lizard-Spock equation */
#define RPSLZB_CHANGE 0.75 /* factor by which to rpslzb parameter */
#define RPSLZB_INITIAL_TIME 0 /* initial time during which rpslzb remains constant */
#define RPSLZB_FINAL_TIME 500 /* final time during which rpslzb remains constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 2500 /* number of frames of movie */
#define NVID 12 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 0 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 40
#define CPLOT_B 42
/* Plot type - height of 3D plot */
#define ZPLOT 42 /* z coordinate in 3D plot */
#define ZPLOT_B 42 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define PRINT_RPSLZB 1 /* set to 1 to print rpslzb parameter */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 0 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 18 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 10.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 0.55 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.001 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.0 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.05 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 20 May 22 - Quantum Sinai billiard: Wave function of a particle colliding with a circular obstacle ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_coherent_state(-0.7, 0.0, 15.0, 0.0, 0.15, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1000 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 650 /* number of grid points on x axis */
#define NY 650 /* number of grid points on y axis */
#define XMIN -1.125
#define XMAX 1.125 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 5 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 2 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 2 /* number of fields for which to compute Laplacian */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 3 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.15 /* parameter controlling the dimensions of domain */
#define MU 0.06 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.00000001
#define VISCOSITY 1.0
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define RPSLZB 0.75 /* second parameter in Rock-Paper-Scissors-Lizard-Spock type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 0 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
#define CHANGE_RPSLZB 0 /* set to 1 to change second parameter in Rock-Paper-Scissors-Lizard-Spock equation */
#define RPSLZB_CHANGE 0.75 /* factor by which to rpslzb parameter */
#define RPSLZB_INITIAL_TIME 0 /* initial time during which rpslzb remains constant */
#define RPSLZB_FINAL_TIME 500 /* final time during which rpslzb remains constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 600 /* number of frames of movie */
#define NVID 550 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 4 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 50 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 1 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 30
#define CPLOT_B 31
/* Plot type - height of 3D plot */
#define ZPLOT 30 /* z coordinate in 3D plot */
#define ZPLOT_B 30 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define DRAW_OUTSIDE_GRAY 1 /* experimental - draw outside of billiard in gray */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define PRINT_RPSLZB 0 /* set to 1 to print rpslzb parameter */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 11 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 18 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 15.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 0.55 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 1.0 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.0 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.0 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 19 May 22 - A centrifuge ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -0.65
#define INITXMAX 0.65 /* x interval for initial condition */
#define INITYMIN -0.65
#define INITYMAX 0.65 /* y interval for initial condition */
#define BCXMIN -2.0
#define BCXMAX 2.0 /* x interval for boundary condition */
#define BCYMIN -1.125
#define BCYMAX 1.125 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 1 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 4 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 1 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.7 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 3.75 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.05 /* parameter controlling the dimensions of domain */
#define MU 0.012 /* parameter controlling radius of particles */
#define MU_B 0.018 /* parameter controlling radius of particles of second type */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 4100 /* number of frames of movie */
#define NVID 300 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 100 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 3
/* Plot type, see list in global_ljones.c */
#define PLOT 5
#define PLOT_B 8 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 2.0e2 /* energy of particle with hottest color */
#define HUE_TYPE0 60.0 /* hue of particles of type 0 */
#define HUE_TYPE1 260.0 /* hue of particles of type 1 */
#define HUE_TYPE2 220.0 /* hue of particles of type 2 */
#define HUE_TYPE3 220.0 /* hue of particles of type 3 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 1.0e-6 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.5 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 3.5 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 0.0 /* damping coefficient of particles */
#define PARTICLE_MASS 5.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.1 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 1.0e11 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 1.0e11 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.0 /* radius in which to count neighbours */
#define GRAVITY 5000.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 100.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 0 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 0.02 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 0 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define ROTATE_BOUNDARY 1 /* set to 1 to rotate the repelling segments */
#define SMOOTH_ROTATION 1 /* set to 1 to update segments at each time step (rather than at each movie frame) */
#define PERIOD_ROTATE_BOUNDARY 3600 /* period of rotating boundary */
#define ROTATE_INITIAL_TIME 0 /* initial time without rotation */
#define ROTATE_FINAL_TIME 500 /* final time without rotation */
#define PRINT_OMEGA 1 /* set to 1 to print angular speed */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define REACTION_DIFFUSION 0 /* set to 1 to simulate a chemical reaction (particles may change type) */
#define RD_TYPES 3 /* number of types in reaction-diffusion equation */
#define REACTION_PROB 0.03 /* probability controlling reaction term */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e12 /* maximal force */
#define FLOOR_OMEGA 0 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 40 /* size of hashgrid in x direction */
#define HASHY 20 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 18 May 22 - A Rock-Paper-Scissors-Lizard-Spock reaction-diffusion equation ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_random(0.5, 0.4, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1920 /* number of grid points on x axis */
#define NY 1000 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 41 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 5 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 5 /* number of fields for which to compute Laplacian */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 1.5 /* parameter controlling the dimensions of domain */
#define MU 0.06 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.0000005
#define VISCOSITY 0.05
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define RPSLZB 0.75 /* second parameter in Rock-Paper-Scissors-Lizard-Spock type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 1 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 2000 /* number of frames of movie */
#define NVID 12 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 0 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 40
#define CPLOT_B 42
/* Plot type - height of 3D plot */
#define ZPLOT 41 /* z coordinate in 3D plot */
#define ZPLOT_B 42 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 0 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 18 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 10.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 0.55 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.75 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.0 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.05 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 17 May 22 - Average energy of waves radiating from a von Koch snowflake ###
**Program:** `wave_3d.c`
**Initial condition in function `animation()`:** `init_circular_wave_mod(0.0, 0.0, phi, psi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1200 /* number of grid points on x axis */
#define NY 1200 /* number of grid points on y axis */
#define HIGHRES 0 /* set to 1 if resolution of grid is double that of displayed image */
#define XMIN -1.5
#define XMAX 1.5 /* x interval */
#define YMIN -1.5
#define YMAX 1.5 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 0.8 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 41 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 202 /* pattern of circles or polygons, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.5 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 7 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 36 /* number of grid point for grid of disks */
#define NGRIDY 6 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -2.9
#define ISO_XSHIFT_RIGHT 1.4
#define ISO_YSHIFT_LEFT -0.15
#define ISO_YSHIFT_RIGHT -0.15
#define ISO_SCALE 0.5 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.017 /* frequency of periodic excitation */
#define AMPLITUDE 0.9 /* amplitude of periodic excitation */
#define COURANT 0.1 /* Courant number */
#define COURANTB 0.025 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 2.0e-4 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
#define ADD_OSCILLATING_SOURCE 0 /* set to 1 to add an oscillating wave source */
#define OSCILLATING_SOURCE_PERIOD 30 /* period of oscillating source */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 1500 /* number of frames of movie */
#define NVID 6 /* number of iterations between images displayed on screen */
#define NSEG 1000 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 100 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
/* Parameters of initial condition */
#define INITIAL_AMP 0.75 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0003 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.02 /* wavelength of initial condition */
/* Plot type, see list in global_pdes.c */
#define ZPLOT 108 /* wave height */
#define CPLOT 108 /* color scheme */
#define ZPLOT_B 109
#define CPLOT_B 109 /* plot type for second movie */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define FLOOR_ZCOORD 1 /* set to 1 to draw only facets with z not too negative */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 0 /* set to 1 to draw front of boundary after drawing wave */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw construction lines of certain domains */
#define FADE_IN_OBSTACLE 1 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.02 /* vertical scaling in energy plot */
#define PLOT_SCALE_LOG_ENERGY 1.0 /* vertical scaling in log energy plot */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes */
#define COLOR_PALETTE 11 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 12 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 1.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define VSCALE_ENERGY 10.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define LOG_SCALE 0.2 /* scaling factor for energy log representation */
#define LOG_SHIFT -0.0 /* shift of colors on log scale */
#define LOG_ENERGY_FLOOR -1000.0 /* floor value for log of (total) energy */
#define LOG_MEAN_ENERGY_SHIFT 5.0 /* additional shift for log of mean energy */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -200.0 /* amplitude of variation of hue for color scheme C_HUE */
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 30.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 150.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
#define SAVE_TIME_SERIES 0 /* set to 1 to save wave time series at a point */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters controlling 3D projection */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {6.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.07 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.5 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.0 /* overall y shift for REP_PROJ_3D representation */
```
### 16 May 22 - Lennard-Jones particles of increasing temperature approximating the Rock-Paper-Scissors system ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -1.95
#define INITXMAX 1.95 /* x interval for initial condition */
#define INITYMIN -1.075
#define INITYMAX 1.075 /* y interval for initial condition */
#define BCXMIN -2.0
#define BCXMAX 2.0 /* x interval for boundary condition */
#define BCYMIN -1.125
#define BCYMAX 1.125 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 0 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 2 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.8 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 3.0 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.012 /* parameter controlling radius of particles */
#define MU_B 0.0254 /* parameter controlling radius of particles of second type */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 1600 /* number of frames of movie */
#define NVID 300 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 3
/* Plot type, see list in global_ljones.c */
#define PLOT 5
#define PLOT_B 9 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 2.0e2 /* energy of particle with hottest color */
#define HUE_TYPE0 280.0 /* hue of particles of type 0 */
#define HUE_TYPE1 180.0 /* hue of particles of type 1 */
#define HUE_TYPE2 70.0 /* hue of particles of type 2 */
#define HUE_TYPE3 210.0 /* hue of particles of type 3 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 1.0e-6 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.0 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 5.0 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 0.0 /* damping coefficient of particles */
#define PARTICLE_MASS 1.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 10.0 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 5.0e9 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 5.0e9 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.0 /* radius in which to count neighbours */
#define GRAVITY 0.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 100.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 1 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 0.02 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 0 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define ROTATE_BOUNDARY 0 /* set to 1 to rotate the repelling segments */
#define PERIOD_ROTATE_BOUNDARY 2500 /* period of rotating boundary */
#define ROTATE_INITIAL_TIME 0 /* initial time without rotation */
#define ROTATE_FINAL_TIME 500 /* final time without rotation */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define REACTION_DIFFUSION 1 /* set to 1 to simulate a chemical reaction (particles may change type) */
#define RD_TYPES 3 /* number of types in reaction-diffusion equation */
#define REACTION_PROB 0.03 /* probability controlling reaction term */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e9 /* maximal force */
#define FLOOR_OMEGA 0 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 100 /* size of hashgrid in x direction */
#define HASHY 50 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 15 May 22 - A scarred solution of Schrödingers equation in a stadium, rendered in 3D ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_coherent_state(0.0, 0.0, 0.0, 15.0, 0.4, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 480 /* number of grid points on x axis */
#define NY 240 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 5 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 2 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 2 /* number of fields for which to compute Laplacian */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 2 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 1.5 /* parameter controlling the dimensions of domain */
#define MU 0.06 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.00000002
#define VISCOSITY 0.1
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 1 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 3000 /* number of frames of movie */
#define NVID 1000 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 1 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 30
#define CPLOT_B 31
/* Plot type - height of 3D plot */
#define ZPLOT 30 /* z coordinate in 3D plot */
#define ZPLOT_B 30 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 13 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 10 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 10.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 0.55 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.75 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.0 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.05 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 14 May 22 - Average energy of a wave in an anechoic chamber (3D representation) ###
**Program:** `wave_3d.c`
**Initial condition in function `animation()`:** `init_circular_wave_mod(0.0, 0.0, phi, psi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1800 /* number of grid points on x axis */
#define NY 900 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
#define HIGHRES 0 /* set to 1 if resolution of grid is double that of displayed image */
#define JULIA_SCALE 0.8 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 44 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 202 /* pattern of circles or polygons, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.2 /* parameter controlling the dimensions of domain */
#define MU 0.5 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 36 /* number of grid point for grid of disks */
#define NGRIDY 6 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -2.9
#define ISO_XSHIFT_RIGHT 1.4
#define ISO_YSHIFT_LEFT -0.15
#define ISO_YSHIFT_RIGHT -0.15
#define ISO_SCALE 0.5 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.017 /* frequency of periodic excitation */
#define AMPLITUDE 0.9 /* amplitude of periodic excitation */
#define COURANT 0.1 /* Courant number */
#define COURANTB 0.05 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 2.0e-5 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
#define ADD_OSCILLATING_SOURCE 0 /* set to 1 to add an oscillating wave source */
#define OSCILLATING_SOURCE_PERIOD 30 /* period of oscillating source */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 1500 /* number of frames of movie */
#define NVID 8 /* number of iterations between images displayed on screen */
#define NSEG 1000 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 100 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
/* Parameters of initial condition */
#define INITIAL_AMP 0.75 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0003 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.02 /* wavelength of initial condition */
/* Plot type, see list in global_pdes.c */
#define ZPLOT 108 /* wave height */
#define CPLOT 108 /* color scheme */
#define ZPLOT_B 109
#define CPLOT_B 109 /* plot type for second movie */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define FLOOR_ZCOORD 1 /* set to 1 to draw only facets with z not too negative */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 0 /* set to 1 to draw front of boundary after drawing wave */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw construction lines of certain domains */
#define FADE_IN_OBSTACLE 1 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.02 /* vertical scaling in energy plot */
#define PLOT_SCALE_LOG_ENERGY 1.0 /* vertical scaling in log energy plot */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes */
#define COLOR_PALETTE 14 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 11 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 1.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define VSCALE_ENERGY 10.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define LOG_SCALE 0.25 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0 /* shift of colors on log scale */
#define LOG_ENERGY_FLOOR -1000.0 /* floor value for log of (total) energy */
#define LOG_MEAN_ENERGY_SHIFT 5.0 /* additional shift for log of mean energy */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -200.0 /* amplitude of variation of hue for color scheme C_HUE */
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 20.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 100.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
#define SAVE_TIME_SERIES 0 /* set to 1 to save wave time series at a point */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters controlling 3D projection */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {6.0, 8.0, 6.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.05 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.15 /* overall y shift for REP_PROJ_3D representation */
```
### 13 May 22 - An approximation with Lennard-Jones particles of the Rock-Paper-Scissors reaction-diffusion equation ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -1.95
#define INITXMAX 1.95 /* x interval for initial condition */
#define INITYMIN -1.05
#define INITYMAX 1.05 /* y interval for initial condition */
#define BCXMIN -2.0
#define BCXMAX 2.0 /* x interval for boundary condition */
#define BCYMIN -1.125
#define BCYMAX 1.125 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 0 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 2 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.8 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 3.0 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.012 /* parameter controlling radius of particles */
#define MU_B 0.0254 /* parameter controlling radius of particles of second type */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 1400 /* number of frames of movie */
#define NVID 300 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 3
/* Plot type, see list in global_ljones.c */
#define PLOT 5
#define PLOT_B 9 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 2.0e2 /* energy of particle with hottest color */
#define HUE_TYPE0 280.0 /* hue of particles of type 0 */
#define HUE_TYPE1 180.0 /* hue of particles of type 1 */
#define HUE_TYPE2 70.0 /* hue of particles of type 2 */
#define HUE_TYPE3 210.0 /* hue of particles of type 3 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 1.0e-6 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.0 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 5.0 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 0.0 /* damping coefficient of particles */
#define PARTICLE_MASS 1.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.05 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 5.0e9 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 5.0e9 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.5 /* radius in which to count neighbours */
#define GRAVITY 0.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 50.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 0 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 20.0 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 2000 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define ROTATE_BOUNDARY 0 /* set to 1 to rotate the repelling segments */
#define PERIOD_ROTATE_BOUNDARY 2500 /* period of rotating boundary */
#define ROTATE_INITIAL_TIME 0 /* initial time without rotation */
#define ROTATE_FINAL_TIME 500 /* final time without rotation */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define REACTION_DIFFUSION 1 /* set to 1 to simulate a chemical reaction (particles may change type) */
#define RD_TYPES 3 /* number of types in reaction-diffusion equation */
#define REACTION_PROB 0.03 /* probability controlling reaction term */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e9 /* maximal force */
#define FLOOR_OMEGA 0 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 100 /* size of hashgrid in x direction */
#define HASHY 50 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 12 May 22 - Youngs double-slit experiment for a quantum particle, in 3D ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_coherent_state(-0.75, 0.0, 15.0, 0.0, 0.4, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 600 /* number of grid points on x axis */
#define NY 300 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 5 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 2 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 2 /* number of fields for which to compute Laplacian */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 9 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.4 /* parameter controlling the dimensions of domain */
#define MU 0.06 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.00000001
#define VISCOSITY 0.1
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 0 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 1 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 1500 /* number of frames of movie */
#define NVID 900 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 1 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 1 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 30
#define CPLOT_B 31
/* Plot type - height of 3D plot */
#define ZPLOT 30 /* z coordinate in 3D plot */
#define ZPLOT_B 30 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 0 /* set to 1 to print viscosity */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define FILL_BILLIARD_COMPLEMENT 1 /* set to 1 to fill complement of billiard (for certain shapes only) */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 11 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 17 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 3 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 20.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define SLOPE_SCHROD_LUM 50.0 /* sensitivity of luminosity on module, for color scheme Z_ARGUMENT */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 0.55 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.75 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.0 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.05 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 11 May 22 - Average energy in a Tokarsky room, in 3D ###
**Program:** `wave_3d.c`
**Initial condition in function `animation()`:** `init_circular_wave_mod(polyline[85].x, polyline[85].y, phi, psi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1800 /* number of grid points on x axis */
#define NY 900 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
#define HIGHRES 0 /* set to 1 if resolution of grid is double that of displayed image */
#define JULIA_SCALE 0.8 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 36 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 202 /* pattern of circles or polygons, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 0.8 /* parameter controlling the dimensions of domain */
#define MU 0.2 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 36 /* number of grid point for grid of disks */
#define NGRIDY 6 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -2.9
#define ISO_XSHIFT_RIGHT 1.4
#define ISO_YSHIFT_LEFT -0.15
#define ISO_YSHIFT_RIGHT -0.15
#define ISO_SCALE 0.5 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.017 /* frequency of periodic excitation */
#define AMPLITUDE 0.9 /* amplitude of periodic excitation */
#define COURANT 0.1 /* Courant number */
#define COURANTB 0.06 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
#define ADD_OSCILLATING_SOURCE 0 /* set to 1 to add an oscillating wave source */
#define OSCILLATING_SOURCE_PERIOD 30 /* period of oscillating source */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 2400 /* number of frames of movie */
#define NVID 8 /* number of iterations between images displayed on screen */
#define NSEG 1000 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 100 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
/* Parameters of initial condition */
#define INITIAL_AMP 0.75 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0003 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.02 /* wavelength of initial condition */
/* Plot type, see list in global_pdes.c */
#define ZPLOT 108 /* wave height */
#define CPLOT 108 /* color scheme */
#define ZPLOT_B 109
#define CPLOT_B 109 /* plot type for second movie */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 1 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define FLOOR_ZCOORD 1 /* set to 1 to draw only facets with z not too negative */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 1 /* set to 1 to draw front of boundary after drawing wave */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw construction lines of certain domains */
#define FADE_IN_OBSTACLE 1 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.02 /* vertical scaling in energy plot */
#define PLOT_SCALE_LOG_ENERGY 1.0 /* vertical scaling in log energy plot */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes */
#define COLOR_PALETTE 13 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 11 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.4 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 10.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define VSCALE_ENERGY 150.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define LOG_SCALE 3.0 /* scaling factor for energy log representation */
#define LOG_SHIFT -2.0 /* shift of colors on log scale */
#define LOG_ENERGY_FLOOR -1000.0 /* floor value for log of (total) energy */
#define LOG_MEAN_ENERGY_SHIFT 5.0 /* additional shift for log of mean energy */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -200.0 /* amplitude of variation of hue for color scheme C_HUE */
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 50.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 50.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 1 /* set to 1 to draw color scheme horizontally */
#define SAVE_TIME_SERIES 0 /* set to 1 to save wave time series at a point */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters controlling 3D projection */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {2.0, 8.0, 6.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.04 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.35 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.1 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.05 /* overall y shift for REP_PROJ_3D representation */
```
### 10 May 22 - What the hourglass icon should really look like: Rotating version with Lennard-Jones particles ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -0.7
#define INITXMAX 0.7 /* x interval for initial condition */
#define INITYMIN 0.1
#define INITYMAX 0.6 /* y interval for initial condition */
#define BCXMIN -0.7
#define BCXMAX 0.7 /* x interval for boundary condition */
#define BCYMIN -0.85
#define BCYMAX 0.85 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 1 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 2 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.8 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 2.75 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.013 /* parameter controlling radius of particles */
#define MU_B 0.0254 /* parameter controlling radius of particles of second type */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 5500 /* number of frames of movie */
#define NVID 650 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 10 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 0
/* Plot type, see list in global_ljones.c */
#define PLOT 0
#define PLOT_B 8 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 2.0e2 /* energy of particle with hottest color */
#define HUE_TYPE0 280.0 /* hue of particles of type 0 */
#define HUE_TYPE1 135.0 /* hue of particles of type 1 */
#define HUE_TYPE2 70.0 /* hue of particles of type 1 */
#define HUE_TYPE3 210.0 /* hue of particles of type 1 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 5.0e-7 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.0 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 5.0 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 0.0 /* damping coefficient of particles */
#define PARTICLE_MASS 1.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.01 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 5.0e9 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 5.0e9 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.5 /* radius in which to count neighbours */
#define GRAVITY 10000.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 50.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 0 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 20.0 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 2000 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define ROTATE_BOUNDARY 1 /* set to 1 to rotate the repelling segments */
#define PERIOD_ROTATE_BOUNDARY 2500 /* period of rotating boundary */
#define ROTATE_INITIAL_TIME 0 /* initial time without rotation */
#define ROTATE_FINAL_TIME 500 /* final time without rotation */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e9 /* maximal force */
#define FLOOR_OMEGA 1 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 40 /* size of hashgrid in x direction */
#define HASHY 20 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 9 May 22 - Colliding spirals in the Rock-Paper-Scissors equation 6: norm and direction of gradient in 3D ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_random(0.5, 0.4, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1920 /* number of grid points on x axis */
#define NY 1000 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 4 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 3 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 3 /* number of fields for which to compute Laplacian */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 1.5 /* parameter controlling the dimensions of domain */
#define MU 0.8 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.0000005
#define VISCOSITY 0.1
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 1 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 1 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 10 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 2500 /* number of frames of movie */
#define NVID 5 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 1 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 231
// #define CPLOT 22
#define CPLOT_B 231
/* Plot type - height of 3D plot */
#define ZPLOT 23 /* z coordinate in 3D plot */
#define ZPLOT_B 23 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 1 /* set to 1 to print viscosity */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 17 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 0 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 4 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 1.75 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 0.55 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {3.0, 7.0, 7.5}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.07 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 1.7 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.0 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.05 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 8 May 22 - A circular lens, wave height and cumulative energy in 3D ###
**Program:** `wave_3d.c`
**Initial condition in function `animation()`:** `init_wave_flat_mod(phi, psi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1800 /* number of grid points on x axis */
#define NY 900 /* number of grid points on y axis */
#define XMIN -0.7
#define XMAX 3.3 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
#define HIGHRES 0 /* set to 1 if resolution of grid is double that of displayed image */
#define JULIA_SCALE 0.8 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 47 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 202 /* pattern of circles or polygons, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA -1.2 /* parameter controlling the dimensions of domain */
#define MU 0.2 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 36 /* number of grid point for grid of disks */
#define NGRIDY 6 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -2.9
#define ISO_XSHIFT_RIGHT 1.4
#define ISO_YSHIFT_LEFT -0.15
#define ISO_YSHIFT_RIGHT -0.15
#define ISO_SCALE 0.5 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.017 /* frequency of periodic excitation */
#define AMPLITUDE 0.9 /* amplitude of periodic excitation */
#define COURANT 0.1 /* Courant number */
#define COURANTB 0.06 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
#define ADD_OSCILLATING_SOURCE 0 /* set to 1 to add an oscillating wave source */
#define OSCILLATING_SOURCE_PERIOD 30 /* period of oscillating source */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 1600 /* number of frames of movie */
#define NVID 8 /* number of iterations between images displayed on screen */
#define NSEG 1000 /* number of segments of boundary */
#define INITIAL_TIME 50 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 3 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 100 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
/* Parameters of initial condition */
#define INITIAL_AMP 0.75 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0003 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.02 /* wavelength of initial condition */
/* Plot type, see list in global_pdes.c */
#define ZPLOT 103 /* wave height */
#define CPLOT 103 /* color scheme */
#define ZPLOT_B 107
#define CPLOT_B 107 /* plot type for second movie */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 0 /* set to 1 to draw front of boundary after drawing wave */
#define FADE_IN_OBSTACLE 1 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PLOT_SCALE_LOG_ENERGY 0.7 /* vertical scaling in log energy plot */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes */
#define COLOR_PALETTE 17 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 13 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.2 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 10.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define LOG_SCALE 3.0 /* scaling factor for energy log representation */
#define LOG_SHIFT -2.0 /* shift of colors on log scale */
#define LOG_ENERGY_FLOOR -8.0 /* floor value for log of (total) energy */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -200.0 /* amplitude of variation of hue for color scheme C_HUE */
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 14.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 35.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
#define SAVE_TIME_SERIES 0 /* set to 1 to save wave time series at a point */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters controlling 3D projection */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.075 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.2 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.5 /* overall y shift for REP_PROJ_3D representation */
```
### 7 May 22 - Phonons in a Lennard-Jones crystal with defects ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -1.48
#define INITXMAX 1.48 /* x interval for initial condition */
#define INITYMIN -0.77
#define INITYMAX 0.77 /* y interval for initial condition */
#define BCXMIN -1.5
#define BCXMAX 1.5 /* x interval for boundary condition */
#define BCYMIN -0.8
#define BCYMAX 0.8 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 1 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 3 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.8 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 3.0 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.016 /* parameter controlling radius of particles */
#define MU_B 0.0254 /* parameter controlling radius of particles of second type */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 2500 /* number of frames of movie */
#define NVID 550 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 10 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 0
/* Plot type, see list in global_ljones.c */
#define PLOT 8
#define PLOT_B 3 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 5.0e1 /* energy of particle with hottest color */
#define HUE_TYPE0 280.0 /* hue of particles of type 0 */
#define HUE_TYPE1 135.0 /* hue of particles of type 1 */
#define HUE_TYPE2 70.0 /* hue of particles of type 1 */
#define HUE_TYPE3 210.0 /* hue of particles of type 1 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 1.0e-6 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.5 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 5.0 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 0.0 /* damping coefficient of particles */
#define PARTICLE_MASS 1.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 0.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.1 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 5.0e6 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 5.0e6 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.5 /* radius in which to count neighbours */
#define GRAVITY 0.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 50.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 1 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 20.0 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 1 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 2000 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 1 /* set to 1 to add particles */
#define ADD_TIME 500 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e9 /* maximal force */
#define FLOOR_OMEGA 1 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 40 /* size of hashgrid in x direction */
#define HASHY 20 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 6 May 22 - Colliding spirals in the Rock-Paper-Scissors equation 5: norm of the change of phase ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_random(0.5, 0.4, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 0 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1920 /* number of grid points on x axis */
#define NY 1000 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 4 /* choice of reaction term, see list in global_3d.c */
#define NFIELDS 3 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 3 /* number of fields for which to compute Laplacian */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 1.5 /* parameter controlling the dimensions of domain */
#define MU 0.8 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.0000005
#define VISCOSITY 0.05
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 1 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 1 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 25 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 100.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 3200 /* number of frames of movie */
#define NVID 5 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 0 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 22
#define CPLOT_B 231
/* Plot type - height of 3D plot */
#define ZPLOT 22 /* z coordinate in 3D plot */
#define ZPLOT_B 25 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 1 /* set to 1 to print viscosity */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 17 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 17 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 4 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 1.75 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 0.55 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {3.0, 7.0, 7.5}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.035 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 1.7 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.0 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.05 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 5 May 22 - Waves radiating from the Mandelbrot set, in 3D ###
**Program:** `wave_3d.c`
**Initial condition in function `animation()`:** `init_circular_wave_mod(0.0, 0.0, phi, psi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1800 /* number of grid points on x axis */
#define NY 900 /* number of grid points on y axis */
#define XMIN -2.5
#define XMAX 1.5 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
#define HIGHRES 0 /* set to 1 if resolution of grid is double that of displayed image */
#define JULIA_SCALE 0.8 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 24 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 202 /* pattern of circles or polygons, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 1.5 /* parameter controlling the dimensions of domain */
#define MU 0.037 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 36 /* number of grid point for grid of disks */
#define NGRIDY 6 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -2.9
#define ISO_XSHIFT_RIGHT 1.4
#define ISO_YSHIFT_LEFT -0.15
#define ISO_YSHIFT_RIGHT -0.15
#define ISO_SCALE 0.5 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define AMPLITUDE 0.8 /* amplitude of periodic excitation */
#define COURANT 0.04 /* Courant number */
#define COURANTB 0.08 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
#define ADD_OSCILLATING_SOURCE 0 /* set to 1 to add an oscillating wave source */
#define OSCILLATING_SOURCE_PERIOD 30 /* period of oscillating source */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 1750 /* number of frames of movie */
#define NVID 8 /* number of iterations between images displayed on screen */
#define NSEG 1000 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 3 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 100 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
/* Parameters of initial condition */
#define INITIAL_AMP 0.75 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0003 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.02 /* wavelength of initial condition */
/* Plot type, see list in global_pdes.c */
#define ZPLOT 103 /* wave height */
#define CPLOT 103 /* color scheme */
#define ZPLOT_B 107
#define CPLOT_B 107 /* plot type for second movie */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 0 /* set to 1 to draw front of boundary after drawing wave */
#define FADE_IN_OBSTACLE 1 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PLOT_SCALE_LOG_ENERGY 0.7 /* vertical scaling in log energy plot */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes */
#define COLOR_PALETTE 17 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 13 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.2 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 5.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define VSCALE_ENERGY 100.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.5 /* scaling factor for energy log representation */
#define LOG_SHIFT -2.0 /* shift of colors on log scale */
#define LOG_ENERGY_FLOOR -8.0 /* floor value for log of (total) energy */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -200.0 /* amplitude of variation of hue for color scheme C_HUE */
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 10.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 80.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
#define SAVE_TIME_SERIES 0 /* set to 1 to save wave time series at a point */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters controlling 3D projection */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 8.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.075 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.25 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.0 /* overall y shift for REP_PROJ_3D representation */
```
### 4 May 22 - Phonons induced by bombarding a Lennard-Jones crystal with atoms ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -1.48
#define INITXMAX 1.48 /* x interval for initial condition */
#define INITYMIN -0.77
#define INITYMAX 0.77 /* y interval for initial condition */
#define BCXMIN -1.5
#define BCXMAX 1.5 /* x interval for boundary condition */
#define BCYMIN -0.8
#define BCYMAX 0.8 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 1 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 1 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 0 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.8 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 2.75 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.016 /* parameter controlling radius of particles */
#define MU_B 0.0254 /* parameter controlling radius of particles of second type */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 46 /* number of grid point for grid of disks */
#define NGRIDY 24 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 1800 /* number of frames of movie */
#define NVID 550 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 10 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 0
/* Plot type, see list in global_ljones.c */
#define PLOT 0
#define PLOT_B 8 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 1.0e1 /* energy of particle with hottest color */
#define HUE_TYPE0 280.0 /* hue of particles of type 0 */
#define HUE_TYPE1 135.0 /* hue of particles of type 1 */
#define HUE_TYPE2 70.0 /* hue of particles of type 1 */
#define HUE_TYPE3 210.0 /* hue of particles of type 1 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 1.0e-6 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 4.0 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 5.0 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 0.0 /* damping coefficient of particles */
#define PARTICLE_MASS 1.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 0.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 0 /* set to 1 to switch on thermostat */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.1 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 5.0e5 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 5.0e5 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.0 /* radius in which to count neighbours */
#define GRAVITY 0.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 0 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 50.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 0 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 20.0 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 0 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 0 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 1 /* set to 1 to add particles */
#define ADD_TIME 25 /* time at which to add first particle */
#define ADD_PERIOD 250 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 200 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e9 /* maximal force */
#define FLOOR_OMEGA 1 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 30 /* size of hashgrid in x direction */
#define HASHY 15 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```
### 3 May 22 Colliding spirals in the Rock-Paper-Scissors equation 4: phase and vorticity ###
**Program:** `rde.c`
**Initial condition in function `animation()`:** `init_random(0.5, 0.4, phi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1920 /* number of grid points on x axis */
#define NY 1000 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.041666667
#define YMAX 1.041666667 /* y interval for 9/16 aspect ratio */
/* Choice of simulated equation */
#define RDE_EQUATION 4 /* choice of reaction term, see list below */
#define NFIELDS 3 /* number of fields in reaction-diffusion equation */
#define NLAPLACIANS 3 /* number of fields for which to compute Laplacian */
#define E_HEAT 0 /* heat equation */
#define E_ALLEN_CAHN 1 /* Allen-Cahn equation */
#define E_CAHN_HILLIARD 2 /* Cahn-Hilliard equation */
#define E_FHN 3 /* FitzHugh-Nagumo equation */
#define E_RPS 4 /* rock-paper-scissors equation */
#define JULIA_SCALE 0.5 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 99 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 1.5 /* parameter controlling the dimensions of domain */
#define MU 0.8 /* parameter controlling the dimensions of domain */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 5 /* depth of computation of Menger gasket */
#define MRATIO 5 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -1.65
#define ISO_XSHIFT_RIGHT 0.4
#define ISO_YSHIFT_LEFT -0.05
#define ISO_YSHIFT_RIGHT -0.05
#define ISO_SCALE 0.85 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard in sub_wave.c */
/* Physical patameters of wave equation */
#define DT 0.0000005
#define VISCOSITY 0.5
#define RPSA 0.75 /* parameter in Rock-Paper-Scissors-type interaction */
#define EPSILON 0.8 /* time scale separation */
#define DELTA 0.1 /* time scale separation */
#define FHNA 1.0 /* parameter in FHN equation */
#define FHNC -0.01 /* parameter in FHN equation */
#define BZQ 0.0008 /* parameter in BZ equation */
#define BZF 1.2 /* parameter in BZ equation */
#define T_OUT 2.0 /* outside temperature */
#define T_IN 0.0 /* inside temperature */
#define SPEED 0.0 /* speed of drift to the right */
#define ADD_NOISE 0 /* set to 1 to add noise, set to 2 to add noise in right half */
#define NOISE_INTENSITY 0.1 /* noise intensity */
#define CHANGE_VISCOSITY 1 /* set to 1 to change the viscosity in the course of the simulation */
#define ADJUST_INTSTEP 1 /* set to 1 to decrease integration step when viscosity increases */
#define VISCOSITY_INITIAL_TIME 25 /* initial time during which viscosity remains constant */
#define VISCOSITY_FACTOR 10.0 /* factor by which to change viscosity */
#define VISCOSITY_MAX 2.0 /* max value of viscosity beyond which NVID is increased and integration step is decrase,
for numerical stability */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 1
/* Parameters for length and speed of simulation */
#define NSTEPS 2000 /* number of frames of movie */
#define NVID 5 /* number of iterations between images displayed on screen */
#define ACCELERATION_FACTOR 1.0 /* factor by which to increase NVID in course of simulation */
#define DT_ACCELERATION_FACTOR 1.0 /* factor by which to increase time step in course of simulation */
#define MAX_DT 0.024 /* maximal value of integration step */
#define NSEG 100 /* number of segments of boundary */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 2 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define INITIAL_TIME 0 /* initial still time */
#define MID_FRAMES 50 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
#define PLOT_3D 1 /* controls whether plot is 2D or 3D */
/* Plot type - color scheme */
#define CPLOT 221
#define CPLOT_B 21
/* Plot type - height of 3D plot */
#define ZPLOT 22 /* z coordinate in 3D plot */
#define ZPLOT_B 25 /* z coordinate in second 3D plot */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of P_3D_AMPLITUDE plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define WRAP_ANGLE 1 /* experimental: wrap angle to [0, 2Pi) for interpolation in angle schemes */
#define FADE_IN_OBSTACLE 0 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PRINT_TIME 0 /* set to 1 to print running time */
#define PRINT_VISCOSITY 1 /* set to 1 to print viscosity */
#define DRAW_FIELD_LINES 0 /* set to 1 to draw field lines */
#define FIELD_LINE_WIDTH 1 /* width of field lines */
#define N_FIELD_LINES 120 /* number of field lines */
#define FIELD_LINE_FACTOR 120 /* factor controlling precision when computing origin of field lines */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes, see list in global_pdes.c */
#define COLOR_PALETTE 17 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 10 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* black background */
#define COLOR_SCHEME 4 /* choice of color scheme */
#define COLOR_PHASE_SHIFT 1.0 /* phase shift of color scheme, in units of Pi */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 1.75 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define CURL_SCALE 0.000015 /* scaling factor for curl representation */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 359.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -359.0 /* amplitude of variation of hue for color scheme C_HUE */
#define E_SCALE 100.0 /* scaling factor for energy representation */
#define LOG_SCALE 1.0 /* scaling factor for energy log representation */
#define LOG_SHIFT 0.0
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 0.55 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
/* only for compatibility with wave_common.c */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.03 /* Courant number in medium B */
#define INITIAL_AMP 0.5 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0002 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.1 /* wavelength of initial condition */
#define VSCALE_ENERGY 200.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
/* end of constants added only for compatibility with wave_common.c */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {3.0, 7.0, 7.5}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.035 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 1.7 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D 0.0 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.05 /* overall y shift for REP_PROJ_3D representation */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
```
### 2 May 22 - Olympus Mons: Waves escaping a sunflower spiral of triangles, 3D rendering ###
**Program:** `wave_3d.c`
**Initial condition in function `animation()`:** `init_circular_wave_mod(0.0, 0.0, phi, psi, xy_in);`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1920 /* window width */
#define WINHEIGHT 1000 /* window height */
#define NX 1400 /* number of grid points on x axis */
#define NY 1400 /* number of grid points on y axis */
#define XMIN -1.5
#define XMAX 1.5 /* x interval */
#define YMIN -1.5
#define YMAX 1.5 /* y interval for 9/16 aspect ratio */
#define HIGHRES 0 /* set to 1 if resolution of grid is double that of displayed image */
#define JULIA_SCALE 0.8 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 40 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 202 /* pattern of circles or polygons, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 1.0 /* parameter controlling the dimensions of domain */
#define MU 0.037 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 2.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 3 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 36 /* number of grid point for grid of disks */
#define NGRIDY 6 /* number of grid point for grid of disks */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
#define ISO_XSHIFT_LEFT -2.9
#define ISO_XSHIFT_RIGHT 1.4
#define ISO_YSHIFT_LEFT -0.15
#define ISO_YSHIFT_RIGHT -0.15
#define ISO_SCALE 0.5 /* coordinates for isospectral billiards */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.005 /* frequency of periodic excitation */
#define AMPLITUDE 0.8 /* amplitude of periodic excitation */
#define COURANT 0.08 /* Courant number */
#define COURANTB 0.02 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 1.0e-1 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
#define ADD_OSCILLATING_SOURCE 0 /* set to 1 to add an oscillating wave source */
#define OSCILLATING_SOURCE_PERIOD 30 /* period of oscillating source */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 2500 /* number of frames of movie */
#define NVID 8 /* number of iterations between images displayed on screen */
#define NSEG 1000 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 3 /* width of billiard boundary */
#define PAUSE 100 /* number of frames after which to pause */
#define PSLEEP 2 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 100 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
#define FADE 1 /* set to 1 to fade at end of movie */
/* Parameters of initial condition */
#define INITIAL_AMP 0.75 /* amplitude of initial condition */
#define INITIAL_VARIANCE 0.0003 /* variance of initial condition */
#define INITIAL_WAVELENGTH 0.02 /* wavelength of initial condition */
/* Plot type, see list in global_pdes.c */
#define ZPLOT 103 /* wave height */
#define CPLOT 103 /* color scheme */
#define ZPLOT_B 107
#define CPLOT_B 106 /* plot type for second movie */
#define AMPLITUDE_HIGH_RES 1 /* set to 1 to increase resolution of plot */
#define SHADE_3D 1 /* set to 1 to change luminosity according to normal vector */
#define NON_DIRICHLET_BC 0 /* set to 1 to draw only facets in domain, if field is not zero on boundary */
#define DRAW_BILLIARD 1 /* set to 1 to draw boundary */
#define DRAW_BILLIARD_FRONT 0 /* set to 1 to draw front of boundary after drawing wave */
#define FADE_IN_OBSTACLE 1 /* set to 1 to fade color inside obstacles */
#define PLOT_SCALE_ENERGY 0.05 /* vertical scaling in energy plot */
#define PLOT_SCALE_LOG_ENERGY 0.7 /* vertical scaling in log energy plot */
/* 3D representation */
#define REPRESENTATION_3D 1 /* choice of 3D representation */
#define REP_AXO_3D 0 /* linear projection (axonometry) */
#define REP_PROJ_3D 1 /* projection on plane orthogonal to observer line of sight */
/* Color schemes */
#define COLOR_PALETTE 11 /* Color palette, see list in global_pdes.c */
#define COLOR_PALETTE_B 13 /* Color palette, see list in global_pdes.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.05 /* sensitivity of color on wave amplitude */
#define VSCALE_AMPLITUDE 30.0 /* additional scaling factor for color scheme P_3D_AMPLITUDE */
#define VSCALE_ENERGY 100.0 /* additional scaling factor for color scheme P_3D_ENERGY */
#define PHASE_FACTOR 20.0 /* factor in computation of phase in color scheme P_3D_PHASE */
#define PHASE_SHIFT 0.0 /* shift of phase in color scheme P_3D_PHASE */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1000.0 /* scaling factor for energy representation */
#define LOG_SCALE 0.5 /* scaling factor for energy log representation */
#define LOG_SHIFT 1.5 /* shift of colors on log scale */
#define LOG_ENERGY_FLOOR -6.0 /* floor value for log of (total) energy */
#define RESCALE_COLOR_IN_CENTER 0 /* set to 1 to decrease color intentiy in the center (for wave escaping ring) */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 240.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -200.0 /* amplitude of variation of hue for color scheme C_HUE */
#define DRAW_COLOR_SCHEME 1 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 150.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 400.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
#define SAVE_TIME_SERIES 0 /* set to 1 to save wave time series at a point */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
/* Parameters controlling 3D projection */
double u_3d[2] = {0.75, -0.45}; /* projections of basis vectors for REP_AXO_3D representation */
double v_3d[2] = {-0.75, -0.45};
double w_3d[2] = {0.0, 0.015};
double light[3] = {0.816496581, -0.40824829, 0.40824829}; /* vector of "light" direction for P_3D_ANGLE color scheme */
double observer[3] = {8.0, 8.0, 12.0}; /* location of observer for REP_PROJ_3D representation */
#define Z_SCALING_FACTOR 0.16 /* overall scaling factor of z axis for REP_PROJ_3D representation */
#define XY_SCALING_FACTOR 2.0 /* overall scaling factor for on-screen (x,y) coordinates after projection */
#define ZMAX_FACTOR 1.0 /* max value of z coordinate for REP_PROJ_3D representation */
#define XSHIFT_3D -0.15 /* overall x shift for REP_PROJ_3D representation */
#define YSHIFT_3D 0.0 /* overall y shift for REP_PROJ_3D representation */
```
### 1 May 22 - Lennard-Jones particles under increased gravity, in a container with sides at 120 degrees ###
**Program:** `lennardjones.c`
```
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
#define TIME_LAPSE 0 /* set to 1 to add a time-lapse movie at the end */
/* so far incompatible with double movie */
#define TIME_LAPSE_FACTOR 3 /* factor of time-lapse movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define INITXMIN -0.8
#define INITXMAX 0.8 /* x interval for initial condition */
#define INITYMIN -0.9
#define INITYMAX 0.8 /* y interval for initial condition */
#define BCXMIN -1.9
#define BCXMAX 1.9 /* x interval for boundary condition */
#define BCYMIN -1.05
#define BCYMAX 0.9 /* y interval for boundary condition */
#define OBSXMIN -2.0
#define OBSXMAX 2.0 /* x interval for motion of obstacle */
#define CIRCLE_PATTERN 8 /* pattern of circles, see list in global_ljones.c */
#define ADD_FIXED_OBSTACLES 0 /* set to 1 do add fixed circular obstacles */
#define OBSTACLE_PATTERN 2 /* pattern of obstacles, see list in global_ljones.c */
#define ADD_FIXED_SEGMENTS 1 /* set to 1 to add fixed segments as obstacles */
#define SEGMENT_PATTERN 1 /* pattern of repelling segments, see list in global_ljones.c */
#define TWO_TYPES 0 /* set to 1 to have two types of particles */
#define TPYE_PROPORTION 0.8 /* proportion of particles of first type */
#define SYMMETRIZE_FORCE 1 /* set to 1 to symmetrize two-particle interaction, only needed if particles are not all the same */
#define CENTER_PX 0 /* set to 1 to center horizontal momentum */
#define CENTER_PY 0 /* set to 1 to center vertical momentum */
#define CENTER_PANGLE 0 /* set to 1 to center angular momentum */
#define INTERACTION 1 /* particle interaction, see list in global_ljones.c */
#define INTERACTION_B 1 /* particle interaction for second type of particle, see list in global_ljones.c */
#define SPIN_INTER_FREQUENCY 5.0 /* angular frequency of spin-spin interaction */
#define SPIN_INTER_FREQUENCY_B 2.0 /* angular frequency of spin-spin interaction for second particle type */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 100 /* number of points for Poisson C_RAND_POISSON arrangement */
#define PDISC_DISTANCE 2.75 /* minimal distance in Poisson disc process, controls density of particles */
#define PDISC_CANDIDATES 100 /* number of candidates in construction of Poisson disc process */
#define RANDOM_POLY_ANGLE 0 /* set to 1 to randomize angle of polygons */
#define LAMBDA 2.0 /* parameter controlling the dimensions of domain */
#define MU 0.013 /* parameter controlling radius of particles */
#define MU_B 0.0254 /* parameter controlling radius of particles of second type */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 0.666666666 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 30 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
#define EHRENFEST_RADIUS 0.9 /* radius of container for Ehrenfest urn configuration */
#define EHRENFEST_WIDTH 0.035 /* width of tube for Ehrenfest urn configuration */
#define X_SHOOTER -0.2
#define Y_SHOOTER -0.6
#define X_TARGET 0.4
#define Y_TARGET 0.7 /* shooter and target positions in laser fight */
/* Parameters for length and speed of simulation */
#define NSTEPS 3500 /* number of frames of movie */
#define NVID 200 /* number of iterations between images displayed on screen */
#define NSEG 250 /* number of segments of boundary */
#define INITIAL_TIME 100 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of particle boundary */
#define LINK_WIDTH 2 /* width of links between particles */
#define CONTAINER_WIDTH 4 /* width of container boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
#define MID_FRAMES 20 /* number of still frames between parts of two-part movie */
#define END_FRAMES 100 /* number of still frames at end of movie */
/* Boundary conditions, see list in global_ljones.c */
#define BOUNDARY_COND 0
/* Plot type, see list in global_ljones.c */
#define PLOT 0
#define PLOT_B 8 /* plot type for second movie */
#define COLOR_BONDS 1 /* set to 1 to color bonds according to length */
/* Color schemes */
#define COLOR_PALETTE 10 /* Color palette, see list in global_ljones.c */
#define BLACK 1 /* background */
#define COLOR_SCHEME 3 /* choice of color scheme, see list in global_ljones.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 0.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* particle properties */
#define ENERGY_HUE_MIN 330.0 /* color of original particle */
#define ENERGY_HUE_MAX 50.0 /* color of saturated particle */
#define PARTICLE_HUE_MIN 359.0 /* color of original particle */
#define PARTICLE_HUE_MAX 0.0 /* color of saturated particle */
#define PARTICLE_EMAX 2.0e3 /* energy of particle with hottest color */
#define HUE_TYPE0 280.0 /* hue of particles of type 0 */
#define HUE_TYPE1 135.0 /* hue of particles of type 1 */
#define HUE_TYPE2 70.0 /* hue of particles of type 1 */
#define HUE_TYPE3 210.0 /* hue of particles of type 1 */
#define RANDOM_RADIUS 0 /* set to 1 for random circle radius */
#define DT_PARTICLE 5.0e-7 /* time step for particle displacement */
#define KREPEL 12.0 /* constant in repelling force between particles */
#define EQUILIBRIUM_DIST 5.0 /* Lennard-Jones equilibrium distance */
#define EQUILIBRIUM_DIST_B 5.0 /* Lennard-Jones equilibrium distance for second type of particle */
#define REPEL_RADIUS 20.0 /* radius in which repelling force acts (in units of particle radius) */
#define DAMPING 0.0 /* damping coefficient of particles */
#define PARTICLE_MASS 1.0 /* mass of particle of radius MU */
#define PARTICLE_MASS_B 1.0 /* mass of particle of radius MU */
#define PARTICLE_INERTIA_MOMENT 0.2 /* moment of inertia of particle */
#define PARTICLE_INERTIA_MOMENT_B 0.02 /* moment of inertia of second type of particle */
#define V_INITIAL 10.0 /* initial velocity range */
#define OMEGA_INITIAL 10.0 /* initial angular velocity range */
#define THERMOSTAT 1 /* set to 1 to switch on thermostat */
#define SIGMA 5.0 /* noise intensity in thermostat */
#define BETA 0.005 /* initial inverse temperature */
#define MU_XI 0.01 /* friction constant in thermostat */
#define KSPRING_BOUNDARY 5.0e9 /* confining harmonic potential outside simulation region */
#define KSPRING_OBSTACLE 5.0e9 /* harmonic potential of obstacles */
#define NBH_DIST_FACTOR 4.0 /* radius in which to count neighbours */
#define GRAVITY 4000.0 /* gravity acting on all particles */
#define INCREASE_GRAVITY 1 /* set to 1 to increase gravity during the simulation */
#define GRAVITY_FACTOR 100.0 /* factor by which to increase gravity */
#define GRAVITY_INITIAL_TIME 500 /* time at start of simulation with constant gravity */
#define GRAVITY_RESTORE_TIME 1000 /* time at end of simulation with gravity restored to initial value */
#define ROTATION 0 /* set to 1 to include rotation of particles */
#define COUPLE_ANGLE_TO_THERMOSTAT 0 /* set to 1 to couple angular degrees of freedom to thermostat */
#define DIMENSION_FACTOR 1.0 /* scaling factor taking into account number of degrees of freedom */
#define KTORQUE 50.0 /* force constant in angular dynamics */
#define KTORQUE_B 10.0 /* force constant in angular dynamics */
#define KTORQUE_DIFF 150.0 /* force constant in angular dynamics for different particles */
#define DRAW_SPIN 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_SPIN_B 0 /* set to 1 to draw spin vectors of particles */
#define DRAW_CROSS 1 /* set to 1 to draw cross on particles of second type */
#define SPIN_RANGE 7.0 /* range of spin-spin interaction */
#define SPIN_RANGE_B 5.0 /* range of spin-spin interaction for second type of particle */
#define QUADRUPOLE_RATIO 0.6 /* anisotropy in quadrupole potential */
#define INCREASE_BETA 0 /* set to 1 to increase BETA during simulation */
#define BETA_FACTOR 20.0 /* factor by which to change BETA during simulation */
#define N_TOSCILLATIONS 1.5 /* number of temperature oscillations in BETA schedule */
#define NO_OSCILLATION 0 /* set to 1 to have exponential BETA change only */
#define FINAL_CONSTANT_PHASE 0 /* final phase in which temperature is constant */
#define DECREASE_CONTAINER_SIZE 0 /* set to 1 to decrease size of container */
#define SYMMETRIC_DECREASE 0 /* set tp 1 to decrease container symmetrically */
#define COMPRESSION_RATIO 0.3 /* final size of container */
#define RESTORE_CONTAINER_SIZE 1 /* set to 1 to restore container to initial size at end of simulation */
#define RESTORE_TIME 700 /* time before end of sim at which to restore size */
#define MOVE_OBSTACLE 0 /* set to 1 to have a moving obstacle */
#define CENTER_VIEW_ON_OBSTACLE 0 /* set to 1 to center display on moving obstacle */
#define RESAMPLE_Y 0 /* set to 1 to resample y coordinate of moved particles (for shock waves) */
#define NTRIALS 2000 /* number of trials when resampling */
#define OBSTACLE_RADIUS 0.12 /* radius of obstacle for circle boundary conditions */
#define FUNNEL_WIDTH 0.25 /* funnel width for funnel boundary conditions */
#define OBSTACLE_XMIN 0.0 /* initial position of obstacle */
#define OBSTACLE_XMAX 3.0 /* final position of obstacle */
#define RECORD_PRESSURES 0 /* set to 1 to record pressures on obstacle */
#define N_PRESSURES 100 /* number of intervals to record pressure */
#define N_P_AVERAGE 100 /* size of pressure averaging window */
#define N_T_AVERAGE 50 /* size of temperature averaging window */
#define MAX_PRESSURE 3.0e10 /* pressure shown in "hottest" color */
#define PARTIAL_THERMO_COUPLING 0 /* set to 1 to couple only particles to the right of obstacle to thermostat */
#define PARTIAL_THERMO_SHIFT 0.5 /* distance from obstacle at the right of which particles are coupled to thermostat */
#define INCREASE_KREPEL 0 /* set to 1 to increase KREPEL during simulation */
#define KREPEL_FACTOR 1000.0 /* factor by which to change KREPEL during simulation */
#define PART_AT_BOTTOM 0 /* set to 1 to include "seed" particles at bottom */
#define MASS_PART_BOTTOM 10000.0 /* mass of particles at bottom */
#define NPART_BOTTOM 100 /* number of particles at the bottom */
#define ADD_PARTICLES 0 /* set to 1 to add particles */
#define ADD_TIME 25 /* time at which to add first particle */
#define ADD_PERIOD 20 /* time interval between adding further particles */
#define FINAL_NOADD_PERIOD 250 /* final period where no particles are added */
#define SAFETY_FACTOR 2.0 /* no particles are added at distance less than MU*SAFETY_FACTOR of other particles */
#define TRACER_PARTICLE 0 /* set to 1 to have a tracer particle */
#define N_TRACER_PARTICLES 3 /* number of tracer particles */
#define TRAJECTORY_LENGTH 8000 /* length of recorded trajectory */
#define TRACER_PARTICLE_MASS 4.0 /* relative mass of tracer particle */
#define TRAJECTORY_WIDTH 3 /* width of tracer particle trajectory */
#define POSITION_DEPENDENT_TYPE 0 /* set to 1 to make particle type depend on initial position */
#define POSITION_Y_DEPENDENCE 0 /* set to 1 for the separation between particles to be vertical */
#define PRINT_ENTROPY 0 /* set to 1 to compute entropy */
#define PRINT_PARTICLE_NUMBER 0 /* set to 1 to print total number of particles */
#define EHRENFEST_COPY 0 /* set to 1 to add equal number of larger particles (for Ehrenfest model) */
#define LID_MASS 1000.0 /* mass of lid for BC_RECTANGLE_LID b.c. */
#define LID_WIDTH 0.1 /* width of lid for BC_RECTANGLE_LID b.c. */
#define WALL_MASS 2000.0 /* mass of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_FRICTION 0.0 /* friction on wall for BC_RECTANGLE_WALL b.c. */
#define WALL_WIDTH 0.1 /* width of wall for BC_RECTANGLE_WALL b.c. */
#define WALL_VMAX 100.0 /* max speed of wall */
#define WALL_TIME 500 /* time during which to keep wall */
#define FLOOR_FORCE 1 /* set to 1 to limit force on particle to FMAX */
#define FMAX 1.0e9 /* maximal force */
#define FLOOR_OMEGA 1 /* set to 1 to limit particle momentum to PMAX */
#define PMAX 1000.0 /* maximal force */
#define HASHX 60 /* size of hashgrid in x direction */
#define HASHY 32 /* size of hashgrid in y direction */
#define HASHMAX 100 /* maximal number of particles per hashgrid cell */
#define HASHGRID_PADDING 0.1 /* padding of hashgrid outside simulation window */
#define DRAW_COLOR_SCHEME 0 /* set to 1 to plot the color scheme */
#define COLORBAR_RANGE 8.0 /* scale of color scheme bar */
#define COLORBAR_RANGE_B 12.0 /* scale of color scheme bar for 2nd part */
#define ROTATE_COLOR_SCHEME 0 /* set to 1 to draw color scheme horizontally */
```