103 KiB
103 KiB
Parameter values for YouTube simulations
Created by Nils Berglund and optimized by Marco Mancini
C code for videos on YouTube Channel https://www.youtube.com/c/NilsBerglund
Below are parameter values used for different simulations, as well as initial conditions used in
function animation. Some simulations use variants of the published code. The list is going to be
updated gradually. For older simulations, see files Parameters_July21.md etc.
21 August 21 - A Sinai pinball with infinite horizon
Program: Variant of particle_billiard.c
Initial condition in function animation(): init_drop_config(-1.4, 0.0, -0.5*PID, 0.5*PID, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 21 /* choice of domain shape */
#define CIRCLE_PATTERN 2 /* pattern of circles */
#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 30 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.7 /* parameter controlling shape of domain */
#define MU 0.028 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 0.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 1 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1 /* set to 1 to keep trails of the particles */
#define NSTEPS 11725 /* number of frames of movie */
#define TIME 1400 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.00004 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 256 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 0 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.045 /* length of velocity vectors */
#define BILLIARD_WIDTH 2 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define ERASE_OUTSIDE 1 /* set to 1 to erase outside of rectangular billiard (beta) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
#define END_FRAMES 100 /* number of still frames at end of movie */
20 August 21 - A wave protection alternating square and triangular grids
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.015, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 12 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.85 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 16 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.002 /* frequency of periodic excitation */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.01 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 1.0e-6 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 3000 /* number of frames of movie */
#define NVID 20 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
#define PLOT_B 1 /* plot type for second movie */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
19 August 21 - How a parabolic antenna works
Program: wave_billiard.c
Initial condition in function animation(): ``
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 0 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 720 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 720 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -0.625
#define XMAX 1.625 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 18 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 12 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.25 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 16 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.002 /* frequency of periodic excitation */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.01 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 1.0e-6 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 1400 /* number of frames of movie */
#define NVID 25 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 0 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
#define PLOT_B 1 /* plot type for second movie */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 500.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
18 August 21 - An pinball Ehrenfest model
Program: Variant of particle_billiard.c
Initial condition in function animation(): init_drop_config(-1.4, 0.0, -0.5*PID, 0.5*PID, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 21 /* choice of domain shape */
#define CIRCLE_PATTERN 1 /* pattern of circles */
#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 9 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.8 /* parameter controlling shape of domain */
#define MU 0.04 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 0.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 1000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0 /* set to 1 to keep trails of the particles */
#define NSTEPS 3500 /* number of frames of movie */
#define TIME 1500 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.00001 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 50 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 0 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.03 /* length of velocity vectors */
#define BILLIARD_WIDTH 2 /* width of billiard */
#define PARTICLE_WIDTH 3 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
17 August 21 - Wave protection comparison 6: randomized square grid vs Sierpinski carpet
Program: wave_comparison.c (variant of wave_billiard.c)
Initial condition in function animation(): init_planar_wave(XMIN + 0.015, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -1.8
#define XMAX 1.8 /* x interval */
#define YMIN -1.0125
#define YMAX 1.0125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 15 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 2 /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 10 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.8 /* parameter controlling the dimensions of domain */
#define MU 0.0346 /* parameter controlling the dimensions of domain */
#define MUB 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 20 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.0035 /* frequency of periodic excitation */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 1.0e-5 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 4500 /* number of frames of movie */
#define NVID 25 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 200 /* time after which to start saving frames */
#define COMPUTE_ENERGIES 1 /* set to 1 to compute and print energies */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.5 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
16 August 21 - Long-wavelength waves gradually destroying a randomized square grid of obstacles
Program: mangrove.c (variant of wave_billiard.c)
Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 2 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 1 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define X_SHIFT -0.8 /* x range on which to apply OSCILLATE_TOPBOT */
#define OMEGA 0.0004 /* frequency of periodic excitation */
#define K_BC 3.0 /* spatial period of periodic excitation in y direction */
#define KX_BC 6.0 /* spatial period of periodic excitation in x direction */
#define KY_BC 2.0 /* spatial period of periodic excitation in y direction */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.005 /* Courant number in medium B */
#define GAMMA 5.0e-8 /* damping factor in wave equation */
#define GAMMAB 1.0e-5 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 3300 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 125 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* mangrove colors */
#define MANGROVE_HUE_MIN 180.0 /* color of original mangrove */
#define MANGROVE_HUE_MAX 0.0 /* color of saturated mangrove */
#define MANGROVE_EMAX 1.0e-3 /* max energy for mangrove to survive */
// #define MANGROVE_EMAX 1.0e-4 /* max energy for mangrove to survive */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
15 August 21 - How permeable is a pinball? Particles shot at various arrangements of circles
Program: Variant of particle_billiard.c
Initial condition in function animation(): init_drop_config(-1.25, 0.0, -0.1, 0.1, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 20 /* choice of domain shape */
#define CIRCLE_PATTERN 3 /* pattern of circles */
#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 0.8 /* parameter controlling shape of domain */
#define MU 0.03 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 0.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 500 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1 /* set to 1 to keep trails of the particles */
#define NSTEPS 1000 /* number of frames of movie */
#define TIME 1500 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.00001 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 10 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.02 /* length of velocity vectors */
#define BILLIARD_WIDTH 2 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
14 August 21 - A "golden spiral" wave protection
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.015, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
#define DOUBLE_MOVIE 1 /* set to 1 to produce movies for wave height and energy simultaneously */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 11 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.85 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.002 /* frequency of periodic excitation */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.01 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMAB 1.0e-6 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 3500 /* number of frames of movie */
#define NVID 25 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 200 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
#define PLOT_B 1 /* plot type for second movie */
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2000.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
/* For debugging purposes only */
#define FLOOR 0 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
13 August 21 - Collapse of a triangle lattice wave protection under waves arriving at an angle
Program: mangrove.c (variant of wave_billiard.c)
Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 1 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 1 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define X_SHIFT -0.8 /* x range on which to apply OSCILLATE_TOPBOT */
#define OMEGA 0.002 /* frequency of periodic excitation */
#define K_BC 3.0 /* spatial period of periodic excitation in y direction */
#define KX_BC 30.0 /* spatial period of periodic excitation in x direction */
#define KY_BC 10.0 /* spatial period of periodic excitation in y direction */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.00666 /* Courant number in medium B */
#define GAMMA 5.0e-8 /* damping factor in wave equation */
#define GAMMAB 1.0e-5 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 6000 /* number of frames of movie */
#define NVID 20 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* mangrove colors */
#define MANGROVE_HUE_MIN 180.0 /* color of original mangrove */
#define MANGROVE_HUE_MAX 0.0 /* color of saturated mangrove */
#define MANGROVE_EMAX 2.0e-3 /* max energy for mangrove to survive */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
12 August 21 - Let’s play (frictionless) pinball!
Program: Variant of particle_billiard.c
Initial condition in function animation(): init_drop_config(-0.9, 0.0, 0.117, 1.0, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 720 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -1.125
#define XMAX 1.125 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 21 /* choice of domain shape */
#define CIRCLE_PATTERN 3 /* pattern of circles */
#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 9 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.0 /* parameter controlling shape of domain */
#define MU 0.04 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 0.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 0 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 1 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 1 /* set to 1 to keep trails of the particles */
#define NSTEPS 1150 /* number of frames of movie */
#define TIME 4000 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.00001 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 400 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 0 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.05 /* length of velocity vectors */
#define BILLIARD_WIDTH 2 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
11 August 21 - Wave protection comparison 5: Triangular vs "golden mean" lattice
Program: wave_comparison.c (variant of wave_billiard.c)
Initial condition in function animation(): init_planar_wave(XMIN + 0.00, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN_A 20 /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN_A 1 /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 10 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.8 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define MUB 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 0 /* set to 1 to add oscilating boundary condition on the left */
#define OMEGA 0.0035 /* frequency of periodic excitation */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 6000 /* number of frames of movie */
#define NVID 20 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define COMPUTE_ENERGIES 1 /* set to 1 to compute and print energies */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 1500.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
10 August 21 - Collapse of a "golden mean" wave protection under continuous incoming waves
Program: mangrove.c (variant of wave_billiard.c)
Initial condition in function animation(): init_wave_flat(phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 10 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1 /* set to 1 to add oscilating boundary condition on the left */
#define OSCILLATE_TOPBOT 0 /* set to 1 to enforce a planar wave on top and bottom boundary */
#define OMEGA 0.002 /* frequency of periodic excitation */
#define K_BC 0.0 /* spatial period of periodic excitation in y direction */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.015 /* Courant number in medium B */
#define GAMMA 5.0e-8 /* damping factor in wave equation */
#define GAMMAB 1.0e-5 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 5500 /* number of frames of movie */
#define NVID 20 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 2500.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -50.0 /* amplitude of variation of hue for color scheme C_HUE */
/* mangrove colors */
#define MANGROVE_HUE_MIN 180.0 /* color of original mangrove */
#define MANGROVE_HUE_MAX 0.0 /* color of saturated mangrove */
#define MANGROVE_EMAX 1.2e-3 /* max energy for mangrove to survive */
/* For debugging purposes only */
#define FLOOR 1 /* set to 1 to limit wave amplitude to VMAX */
#define VMAX 10.0 /* max value of wave amplitude */
9 August 21 - Comparison between a cloaking device and a simple refracting layer
Program: wave_comparison.c (variant of wave_billiard.c)
Initial condition in function animation(): init_planar_wave(XMIN + 0.00, 0.0, phi, psi, xy_in);
Parameters in function init_planar_wave(): if ((xy_in[i][j])||(TWOSPEEDS)) phi[i][j] = 0.002*exp(-dist2/0.0005)*cos(-sqrt(dist2)/0.025);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -0.5
#define XMAX 3.5 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN_A 20 /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN_A 6 /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 98 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.12 /* parameter controlling the dimensions of domain */
#define MU 0.1 /* parameter controlling the dimensions of domain */
#define MUB 0.1 /* parameter controlling the dimensions of domain in lower panel */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 3 /* number of grid point for grid of disks */
#define NGRIDY 3 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OSCILLATE_LEFT 1 /* set to 1 to add oscilating boundary condition on the left */
#define OMEGA 0.0035 /* frequency of periodic excitation */
#define AMPLITUDE 1.0 /* amplitude of periodic excitation */
#define COURANT 0.02 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 0.0 /* damping factor on boundary */
#define GAMMA_TOPBOT 0.0 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 0.0 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 0
/* Parameters for length and speed of simulation */
#define NSTEPS 1600 /* number of frames of movie */
#define NVID 20 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 30 /* time after which to start saving frames */
#define COMPUTE_ENERGIES 0 /* set to 1 to compute and print energies */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.4 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 130.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -130.0 /* amplitude of variation of hue for color scheme C_HUE */
8 August 21 - Avoiding a laser in a hexagon with teleporting walls
Program: Variant of particle_billiard.c (to be published later on)
Initial condition in function animation(): init_drop_config(x_shooter, y_shooter, 0.0, DPI, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -1.3
#define XMAX 2.7 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 22 /* choice of domain shape */
#define CIRCLE_PATTERN 12 /* pattern of circles */
#define ABSORBING_CIRCLES 1 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.0 /* parameter controlling shape of billiard */
#define MU 0.015 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 6 /* number of sides of polygon */
#define APOLY 0.0 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 5000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0 /* set to 1 to keep trails of the particles */
#define SHOWZOOM 1 /* set to 1 to show a zoom (for laser in room of mirrors) */
#define PRINT_PARTICLE_NUMBER 1 /* set to 1 to print number of non-absorbed particles */
#define NSTEPS 9500 /* number of frames of movie */
#define TIME 1500 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000005 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 12 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.02 /* length of velocity vectors */
#define BILLIARD_WIDTH 6 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
7 August 21 - Wave protection comparison 4: randomized square grid vs Poisson process
Program: wave_comparison.c (variant of wave_billiard.c)
Initial condition in function animation(): nit_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN_A 20 /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN_A 2 /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 4 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.85 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 5500 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
6 August 21 - A wave protection based on the golden mean
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
/* setting NX to WINWIDTH and NY to WINHEIGHT increases resolution */
/* but will multiply run time by 4 */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 10 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 4500 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 2
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
5 August 21 - Reflecting stoppers won't protect you in a laser fight
Program: Variant of particle_billiard.c (to be published later on)
Initial condition in function animation(): init_drop_config(x_shooter, y_shooter, 0.0, DPI, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 720 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -1.125
#define XMAX 1.125 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 21 /* choice of domain shape */
#define CIRCLE_PATTERN 11 /* pattern of circles */
#define ABSORBING_CIRCLES 0 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.0 /* parameter controlling shape of billiard */
#define MU 0.015 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 0.25 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 5000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0 /* set to 1 to keep trails of the particles */
#define SHOWZOOM 0 /* set to 1 to show a zoom (for laser in room of mirrors) */
#define NSTEPS 1350 /* number of frames of movie */
#define TIME 1500 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000005 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 32 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.02 /* length of velocity vectors */
#define BILLIARD_WIDTH 6 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
4 August 21 - Refraction of a wave on a horizontal ellipse
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 1 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 6 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 1.5 /* parameter controlling the dimensions of domain */
#define MU 0.005 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 1 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.0075 /* Courant number in medium B */
#define COURANTB 0.01 /* Courant number */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 4500 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 100 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 2 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
3 August 21 - Wave protection comparison 3: regular vs random square grid
Program: wave_comparison.c (variant of wave_billiard.c)
Initial condition in function animation(): init_planar_wave(XMIN + 0.01, 0.0, phi, psi, xy_in);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
/* setting NX to WINWIDTH and NY to WINHEIGHT increases resolution */
/* but will multiply run time by 4 */
#define XMIN -2.0
#define XMAX 2.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN_A 20 /* choice of domain shape, see list in global_pdes.c */
#define B_DOMAIN_B 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN_A 0 /* pattern of circles, see list in global_pdes.c */
#define CIRCLE_PATTERN_B 2 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.75 /* parameter controlling the dimensions of domain */
#define MU 0.03 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-6 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 3
/* Parameters for length and speed of simulation */
#define NSTEPS 3000 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 250 /* time after which to start saving frames */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 1
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */
2 August 21 - Avoiding a laser in a room of mirrors, long version with close-up and particle counter
Program: Variant of particle_billiard.c (to be published later on)
Initial condition in function animation(): init_drop_config(x_shooter, y_shooter, 0.0, DPI, configs);
#define MOVIE 1 /* set to 1 to generate movie */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define XMIN -1.3
#define XMAX 2.7 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define SCALING_FACTOR 1.0 /* scaling factor of drawing, needed for flower billiards, otherwise set to 1.0 */
/* Choice of the billiard table, see global_particles.c */
#define B_DOMAIN 21 /* choice of domain shape */
#define CIRCLE_PATTERN 11 /* pattern of circles */
#define ABSORBING_CIRCLES 1 /* set to 1 for circular scatterers to be absorbing */
#define NMAXCIRCLES 1000 /* total number of circles (must be at least NCX*NCY for square grid) */
#define NCX 15 /* number of circles in x direction */
#define NCY 20 /* number of circles in y direction */
#define LAMBDA 1.0 /* parameter controlling shape of billiard */
#define MU 0.015 /* second parameter controlling shape of billiard */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NPOLY 8 /* number of sides of polygon */
#define APOLY 0.25 /* angle by which to turn polygon, in units of Pi/2 */
#define DRAW_BILLIARD 1 /* set to 1 to draw billiard */
#define DRAW_CONSTRUCTION_LINES 1 /* set to 1 to draw additional construction lines for billiard */
#define PERIODIC_BC 0 /* set to 1 to enforce periodic boundary conditions when drawing particles */
#define RESAMPLE 0 /* set to 1 if particles should be added when dispersion too large */
#define DEBUG 0 /* draw trajectories, for debugging purposes */
/* Simulation parameters */
#define NPART 5000 /* number of particles */
#define NPARTMAX 100000 /* maximal number of particles after resampling */
#define LMAX 0.01 /* minimal segment length triggering resampling */
#define DMIN 0.02 /* minimal distance to boundary for triggering resampling */
#define CYCLE 1 /* set to 1 for closed curve (start in all directions) */
#define SHOWTRAILS 0 /* set to 1 to keep trails of the particles */
#define SHOWZOOM 1 /* set to 1 to show a zoom (for laser in room of mirrors) */
#define NSTEPS 8000 /* number of frames of movie */
#define TIME 1500 /* time between movie frames, for fluidity of real-time simulation */
#define DPHI 0.000005 /* integration step */
#define NVID 150 /* number of iterations between images displayed on screen */
/* Decreasing TIME accelerates the animation and the movie */
/* For constant speed of movie, TIME*DPHI should be kept constant */
/* However, increasing DPHI too much deterioriates quality of simulation */
/* NVID tells how often a picture is drawn in the animation, increase it for faster anim */
/* For a good quality movie, take for instance TIME = 400, DPHI = 0.00005, NVID = 100 */
/* Colors and other graphical parameters */
#define NCOLORS 32 /* number of colors */
#define COLORSHIFT 0 /* hue of initial color */
#define RAINBOW_COLOR 1 /* set to 1 to use different colors for all particles */
#define FLOWER_COLOR 0 /* set to 1 to adapt initial colors to flower billiard (tracks vs core) */
#define NSEG 100 /* number of segments of boundary */
#define LENGTH 0.02 /* length of velocity vectors */
#define BILLIARD_WIDTH 6 /* width of billiard */
#define PARTICLE_WIDTH 2 /* width of particles */
#define FRONT_WIDTH 3 /* width of wave front */
#define BLACK 1 /* set to 1 for black background */
#define COLOR_OUTSIDE 0 /* set to 1 for colored outside */
#define OUTER_COLOR 270.0 /* color outside billiard */
#define PAINT_INT 0 /* set to 1 to paint interior in other color (for polygon/Reuleaux) */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1000 /* final sleeping time */
1 August 21 - A cloaking device, optimized version with longer wavelength
Program: wave_billiard.c
Initial condition in function animation(): init_planar_wave(XMIN + 0.00, 0.0, phi, psi, xy_in);
Parameters in init_planar_wave():
if ((xy_in[i][j])||(TWOSPEEDS)) phi[i][j] = 0.01*exp(-dist2/0.05)*cos(-sqrt(dist2)/0.025);
#define MOVIE 1 /* set to 1 to generate movie */
/* General geometrical parameters */
#define WINWIDTH 1280 /* window width */
#define WINHEIGHT 720 /* window height */
#define NX 1280 /* number of grid points on x axis */
#define NY 720 /* number of grid points on y axis */
#define XMIN -1.0
#define XMAX 3.0 /* x interval */
#define YMIN -1.125
#define YMAX 1.125 /* y interval for 9/16 aspect ratio */
#define JULIA_SCALE 1.0 /* scaling for Julia sets */
/* Choice of the billiard table */
#define B_DOMAIN 20 /* choice of domain shape, see list in global_pdes.c */
#define CIRCLE_PATTERN 6 /* pattern of circles, see list in global_pdes.c */
#define P_PERCOL 0.25 /* probability of having a circle in C_RAND_PERCOL arrangement */
#define NPOISSON 300 /* number of points for Poisson C_RAND_POISSON arrangement */
#define LAMBDA 0.2 /* parameter controlling the dimensions of domain */
#define MU 0.005 /* parameter controlling the dimensions of domain */
#define NPOLY 3 /* number of sides of polygon */
#define APOLY 1.0 /* angle by which to turn polygon, in units of Pi/2 */
#define MDEPTH 4 /* depth of computation of Menger gasket */
#define MRATIO 3 /* ratio defining Menger gasket */
#define MANDELLEVEL 1000 /* iteration level for Mandelbrot set */
#define MANDELLIMIT 10.0 /* limit value for approximation of Mandelbrot set */
#define FOCI 1 /* set to 1 to draw focal points of ellipse */
#define NGRIDX 15 /* number of grid point for grid of disks */
#define NGRIDY 20 /* number of grid point for grid of disks */
/* You can add more billiard tables by adapting the functions */
/* xy_in_billiard and draw_billiard below */
/* Physical parameters of wave equation */
#define TWOSPEEDS 0 /* set to 1 to replace hardcore boundary by medium with different speed */
#define OMEGA 0.9 /* frequency of periodic excitation */
#define COURANT 0.01 /* Courant number */
#define COURANTB 0.0075 /* Courant number in medium B */
#define GAMMA 0.0 /* damping factor in wave equation */
#define GAMMA_SIDES 1.0e-4 /* damping factor on boundary */
#define GAMMA_TOPBOT 1.0e-7 /* damping factor on boundary */
#define KAPPA 0.0 /* "elasticity" term enforcing oscillations */
#define KAPPA_SIDES 5.0e-4 /* "elasticity" term on absorbing boundary */
#define KAPPA_TOPBOT 0.0 /* "elasticity" term on absorbing boundary */
/* The Courant number is given by c*DT/DX, where DT is the time step and DX the lattice spacing */
/* The physical damping coefficient is given by GAMMA/(DT)^2 */
/* Increasing COURANT speeds up the simulation, but decreases accuracy */
/* For similar wave forms, COURANT^2*GAMMA should be kept constant */
/* Boundary conditions, see list in global_pdes.c */
#define B_COND 2
/* Parameters for length and speed of simulation */
#define NSTEPS 3500 /* number of frames of movie */
#define NVID 40 /* number of iterations between images displayed on screen */
#define NSEG 100 /* number of segments of boundary */
#define INITIAL_TIME 30 /* time after which to start saving frames */
#define BOUNDARY_WIDTH 1 /* width of billiard boundary */
#define PAUSE 1000 /* number of frames after which to pause */
#define PSLEEP 1 /* sleep time during pause */
#define SLEEP1 1 /* initial sleeping time */
#define SLEEP2 1 /* final sleeping time */
/* Plot type, see list in global_pdes.c */
#define PLOT 0
/* Color schemes */
#define BLACK 1 /* background */
#define COLOR_SCHEME 1 /* choice of color scheme, see list in global_pdes.c */
#define SCALE 0 /* set to 1 to adjust color scheme to variance of field */
#define SLOPE 1.0 /* sensitivity of color on wave amplitude */
#define ATTENUATION 0.0 /* exponential attenuation coefficient of contrast with time */
#define E_SCALE 750.0 /* scaling factor for energy representation */
#define COLORHUE 260 /* initial hue of water color for scheme C_LUM */
#define COLORDRIFT 0.0 /* how much the color hue drifts during the whole simulation */
#define LUMMEAN 0.5 /* amplitude of luminosity variation for scheme C_LUM */
#define LUMAMP 0.3 /* amplitude of luminosity variation for scheme C_LUM */
#define HUEMEAN 220.0 /* mean value of hue for color scheme C_HUE */
#define HUEAMP -220.0 /* amplitude of variation of hue for color scheme C_HUE */