Modern C++
Programming
16. Utilities
Federico Busato
2023-12-21
I/O Stream
<iostream> input/output library refers to a family of classes and supporting
functions in the C++ Standard Library that implement stream-based input/output
capabilities
There are four predefined iostreams:
• cin standard input (stdin)
• cout standard output (stdout) [buffered]
• cerr standard error (stderr) [unbuffered]
• clog standard error (stderr) [unbuffered]
buffered: the content of the buffer is not write to disk until some events occur
4/78
I/O Stream (manipulator) 1/3
Basic I/O Stream manipulator:
• flush flushes the output stream cout ≪ flush;
• endl shortcut for cout ≪ "\n" ≪ flush;
cout ≪ endl
• flush and endl force the program to synchronize with the terminal → very
slow operation!
5/78
I/O Stream (manipulator) 2/3
• Set integral representation: default: dec
cout ≪ dec ≪ 0xF; prints 16
cout ≪ hex ≪ 16; prints 0xF
cout ≪ oct ≪ 8; prints 10
• Print the underlying bit representation of a value:
#include <bitset>
std::cout << std::bitset<32>(3.45f); // (32: num. of bits)
// print 01000000010111001100110011001101
• Print true/false text:
cout ≪ boolalpha ≪ 1; prints true
cout ≪ boolalpha ≪ 0; prints false
6/78
I/O Stream (manipulator) 3/3
<iomanip>
• Set decimal precision: default: 6
cout ≪ setprecision(2) ≪ 3.538; → 3.54
• Set float representation: default: std::defaultfloat
cout ≪ setprecision(2) ≪ fixed ≪ 32.5; → 32.50
cout ≪ setprecision(2) ≪ scientific ≪ 32.5; → 3.25e+01
• Set alignment: default: right
cout ≪ right ≪ setw(7) ≪ "abc" ≪ "##"; → abc##
cout ≪ left ≪ setw(7) ≪ "abc" ≪ "##"; → abc ##
(better than using tab \t)
7/78
I/O Stream - std::cin
std::cin is an example of input stream. Data coming from a source is read by the program.
In this example cin is the standard input
#include <iostream>
int main() {
int a;
std::cout << "Please enter an integer value:" << endl;
std::cin >> a;
int b;
float c;
std::cout << "Please enter an integer value "
<< "followed by a float value:" << endl;
std::cin >> b >> c; // read an integer and store into "b",
} // then read a float value, and store
// into "c"
8/78
I/O Stream - ofstream/ifstream 1/3
ifstream , ofstream are output and input stream too
<fstream>
• Open a file for reading
Open a file in input mode: ifstream my file("example.txt")
• Open a file for writing
Open a file in output mode: ofstream my file("example.txt")
Open a file in append mode: ofstream my file("example.txt", ios::out | ios::app)
• Read a line getline(my file, string)
• Close a file my file.close()
• Check the stream integrity my file.good()
9/78
I/O Stream - ofstream/ifstream 2/3
• Peek the next character
char current char = my file.peek()
• Get the next character (and advance)
char current char = my file.get()
• Get the position of the current character in the input stream
int byte offset = my file.tellg()
• Set the char position in the input sequence
my file.seekg(byte offset) (absolute position)
my file.seekg(byte offset, position) (relative position)
where position can be:
ios::beg (the begin), ios::end (the end),
ios::cur (current position)
10/78
I/O Stream - ofstream/ifstream 3/3
• Ignore characters until the delimiter is found
my file.ignore(max stream size, <delim>)
e.g. skip until end of line \n
• Get a pointer to the stream buffer object currently associated with the stream
my file.rdbuf()
can be used to redirect file stream
11/78
I/O Stream - Example 1
Open a file and print line by line:
#include <iostream>
#include <fstream>
int main() {
std::ifstream fin("example.txt");
std::string str;
while (fin.good()) {
std::getline(fin, str);
std::cout << str << "\n";
}
fin.close();
}
An alternative version with redirection:
# include <iostream>
# include <fstream>
int main() {
std::ifstream fin("example.txt");
std::cout << fin.rdbuf();
fin.close();
}
12/78
I/O Stream - Example 2
example.txt:
23 70 44\n
\t57\t89
The input stream is independent from the
type of space (multiple space, tab, new-
line \n, \r\n, etc.)
Another example:
#include <iostream>
#include <fstream>
int main() {
std::ifstream fin("example.txt");
char c = fin.peek(); // c = '2'
while (fin.good()) {
int var;
fin >> var;
std::cout << var;
} // print 2370445789
fin.seekg(4);
c = fin.peek(); // c = '0'
fin.close();
}
13/78
I/O Stream -Check the End of a File
• Check the current character
while (fin.peek() != std::char_traits<char>::eof()) // C: EOF
fin >> var;
• Check if the read operation fails
while (fin >> var)
...
• Check if the stream past the end of the file
while (true) {
fin >> var
if (fin.eof())
break;
}
reading-files-in-c-using-ifstream
14/78
I/O Stream (checkRegularType)
Check if a file is a regular file and can be read/written
#include <sys/types.h>
#include <sys/stat.h>
bool checkRegularFile(const char* file_path) {
struct stat info;
if (::stat( file_path, &info ) != 0)
return false; // unable to access
if (info.st_mode & S_IFDIR)
return false; // is a directory
std::ifstream fin(file_path); // additional checking
if (!fin.is_open() || !fin.good())
return false;
try { // try to read
char c; fin >> c;
} catch (std::ios_base::failure&) {
return false;
}
return true;
}
15/78
I/O Stream - File size
Get the file size in bytes in a portable way:
long long int fileSize(const char* file_path) {
std::ifstream fin(file_path); // open the file
fin.seekg(0, ios::beg); // move to the first byte
std::istream::pos_type start_pos = fin.tellg();
// get the start offset
fin.seekg(0, ios::end); // move to the last byte
std::istream::pos_type end_pos = fin.tellg();
// get the end offset
return end_pos - start_pos; // position difference
}
see C++17 file system utilities
16/78
std::string 1/4
std::string is a wrapper of character sequences
More flexible and safer than raw char array but can be slower
#include <string>
int main() {
std::string a; // empty string
std::string b("first");
using namespace std::string_literals; // C++14
std::string c = "second"s; // C++14
}
std::string supports constexpr in C++20
17/78
std::string - Capacity and Search 2/4
• empty() returns true if the string is empty, false otherwise
• size() returns the number of characters in the string
• find(string) returns the position of the first substring equal to the given character
sequence or npos if no substring is found
• rfind(string) returns the position of the last substring equal to the given character
sequence or npos if no substring is found
• find first of(char seq) returns the position of the first character equal to one of the
characters in the given character sequence or npos if no characters is found
• find last of(char seq) returns the position of the last character equal to one of the
characters in the given character sequence or npos if no characters is found
npos special value returned by string methods
18/78
std::string - Operations 3/4
• new string substr(start pos)
returns a substring [start pos, end]
new string substr(start pos, count)
returns a substring [start pos, start pos + count)
• clear() removes all characters from the string
• erase(pos) removes the character at position
erase(start pos, count)
removes the characters at positions [start pos, start pos + count)
• replace(start pos, count, new string)
replaces the part of the string indicated by [start pos, start pos + count) with new string
• c str()
returns a pointer to the raw char sequence
19/78
std::string - Overloaded Operators 4/4
• access specified character string1[i]
• string copy string1 = string2
• string compare string1 == string2
works also with !=,<,≤,>,≥
• concatenate two strings string concat = string1 + string2
• append characters to the end string1 += string2
20/78
Conversion from/to Numeric Values
Converts a string to a numeric value C++11:
• stoi(string) string to signed integer
• stol(string) string to long signed integer
• stoul(string) string to long unsigned integer
• stoull(string) string to long long unsigned integer
• stof(string) string to floating point value (float)
• stod(string) string to floating point value (double)
• stold(string) string to floating point value (long double)
• C++17 std::from chars(start, end, result, base) fast string conversion (no
allocation, no exception)
Converts a numeric value to a string:
• C++11 to string(numeric value) numeric value to string
21/78
Examples
std::string str("si vis pacem para bellum");
cout << str.size(); // print 24
cout << str.find("vis"); // print 3
cout << str.find_last_of("bla"); // print 21, 'l' found
cout << str.substr(7, 5);// print "pacem", pos=7 and count=5
cout << str[1]; // print 'i'
cout << (str == "vis"); // print false
cout << (str < "z"); // print true
const char* raw_str = str.c_str();
cout << string("a") + "b"; // print "ab"
cout << string("ab").erase(0); // print 'b'
char* str2 = "34";
int a = std::stoi(str2); // a = 34;
std::string str3 = std::to_string(a); // str3 = "34"
22/78
Tips
• Conversion from integer to char letter (e.g. 3 → 'C'):
static cast<char>('A'+ value)
value ∈ [0, 26] (English alphabet)
• Conversion from char to integer (e.g. ’C’ → 3): value - 'A'
value ∈ [0, 26]
• Conversion from digit to char number (e.g. 3 → '3'):
static cast<char>('0'+ value)
value ∈ [0, 9]
• char to string std::string(1, char value)
23/78
std::string view 1/3
C++17 std::string view describes a minimum common interface to interact with
string data:
• const std::string&
• const char*
The purpose of std::string view is to avoid copying data which is already owned
by the original object
#include <string>
#include <string_view>
std::string str = "abc"; // new memory allocation + copy
std::string_view = "abc"; // only the reference
24/78
std::string view 2/3
std::string view provides similar functionalities of std::string
#include <iostream>
#include <string>
#include <string_view>
void string_op1(const std::string& str) {}
void string_op2(std::string_view str) {}
string_op1("abcdef"); // allocation + copy
string_op2("abcdef"); // reference
const char* str1 = "abcdef";
std::string str2("abcdef"); // allocation + copy
std::cout << str2.substr(0, 3); // print "abc"
std::string_view str3(str1); // reference
std::cout << str3.substr(0, 3); // print "abc"
25/78
std::string view 3/3
std::string view supports constexpr constructor and methods
constexpr std::string_view str1("abc");
constexpr std::string_view str2 = "abc";
constexpr char c = str1[0]; // 'a'
constexpr bool b = (str1 == str2); // 'true'
constexpr int size = str1.size(); // '3'
constexpr std::string_view str3 = str1.substr(0, 2); // "ab"
constexpr int pos = str1.find("bc"); // '1'
26/78
std::format 1/2
printf functions: no automatic type deduction, error prone, not extensible
stream objects: very verbose, hard to optimize
C++20 std::format provides python style formatting:
• Type-safe
• Support positional arguments
• Extensible (support user-defined types)
• Return a std::string
27/78
std::format - Example 2/2
Integer formatting
std::format("{}", 3); // "3"
std::format("{:b}", 3); // "101"
Floating point formatting
std::format("{:.1f}", 3.273); // "3.1"
Alignment
std::format("{:>6}", 3.27); // " 3.27"
std::format("{:<6}", 3.27); // "3.27 "
Argument reordering
std::format("{1} - {0}", 1, 3); // "3 - 1"
28/78
std::print
C++23 introduces std::print() std::println()
std::print("Hello, {}!\n", name);
std::println("Hello, {}!", name); // prints a newline
29/78
<cmath> Math Library 1/2
<cmath>
• fabs(x) computes absolute value, |x|, C++11
• exp(x) returns e raised to the given power, e
x
• exp2(x) returns 2 raised to the given power, 2
x
, C++11
• log(x) computes natural (base e) logarithm, log
e
(x)
• log10(x) computes base 10 logarithm, log
10
(x)
• log2(x) computes base 2 logarithm, log
2
(x), C++11
• pow(x, y) raises a number to the given power, x
y
• sqrt(x) computes square root,
√
x
• cqrt(x) computes cubic root,
3
√
x, C++11
30/78
<cmath> Math Library 2/2
• sin(x) computes sine, sin(x)
• cos(x) computes cosine, cos(x)
• tan(x) computes tangent, tan(x)
• ceil(x) nearest integer not less than the given value, ⌈x⌉
• floor(x) nearest integer not greater than the given value, ⌊x⌋
• round|lround|llround(x) nearest integer,
x +
1
2
(return type: floating point, long, long long respectively)
Math functions in C++11 can be applied directly to integral types without implicit/explicit
casting (return type: floating point).
en.cppreference.com/w/cpp/numeric/math
31/78
<limits> Numerical Limits
Get numeric limits of a given type:
<limits> C++11
T numeric_limits<T>:: max() // returns the maximum finite value
// value representable
T numeric_limits<T>:: min() // returns the minimum finite value
// value representable
T numeric_limits<T>:: lowest() // returns the lowest finite
// value representable
32/78
<numeric> Mathematical Constants
<numeric> C++20
The header provides numeric constants
• e Euler number e
• pi π
• phi Golden ratio
1+
√
5
2
• sqrt2
√
2
33/78
Integer Division
Integer ceiling division and rounded division:
• Ceiling Division:
value
div
unsigned ceil_div(unsigned value, unsigned div) {
return (value + div - 1) / div;
} // note: may overflow
• Rounded Division:
value
div
+
1
2
unsigned round_div(unsigned value, unsigned div) {
return (value + div / 2) / div;
} // note: may overflow
Note: do not use floating-point conversion (see Basic Concept I)
34/78
Random Number
“Random numbers should not be generated with a method chosen at random”
— Donald E. Knuth
Applications: cryptography, simulations (e.g. Monte Carlo), etc.
35/78
Basic Concepts
• A pseudorandom (PRNG) sequence of numbers satisfies most of the statistical
properties of a truly random sequence but is generated by a deterministic algorithm
(deterministic finite-state machine)
• A quasirandom sequence of n-dimensional points is generated by a deterministic
algorithm designed to fill an n-dimensional space evenly
• The state of a PRNG describes the status of the generator (the values of its variables),
namely where the system is after a certain amount of transitions
• The seed is a value that initializes the starting state of a PRNG. The same seed always
produces the same sequence of results
• The offset of a sequence is used to skip ahead in the sequence
• PRNGs produce uniformly distributed values. PRNGs can also generate values according
to a probability function (binomial, normal, etc.)
37/78
C++ <random> 1/2
The problem:
C rand() function produces poor quality random numbers
• C++14 discourage the use of rand() and srand()
C++11 introduces pseudo random number generation (PRNG) facilities to produce
random numbers by using combinations of generators and distributions
A random generator requires four steps:
(1) Select the seed
(2) Define the random engine
<type of random engine> generator(seed)
(3) Define the distribution
<type of distribution> distribution(range start, range end)
(4) Produce the random number
distribution(generator)
38/78
C++ <random> 2/2
Simplest example:
#include <iostream>
#include <random>
int main() {
unsigned seed = ...;
std::default_random_engine generator(seed);
std::uniform_int_distribution<int> distribution(0, 9);
std::cout << distribution(generator); // first random number
std::cout << distribution(generator); // second random number
}
It generates two random integer numbers in the range [0, 9] by using the default
random engine
39/78
Seed 1/3
Given a seed, the generator produces always the same sequence
The seed could be selected randomly by using the current time:
#include <random>
#include <chrono>
unsigned seed = std::chrono::system_clock::now()
.time_since_epoch().count();
std::default_random_engine generator(seed);
chrono::system clock::now() returns an object representing the current point in time
.time since epoch().count() returns the count of ticks that have elapsed since January 1, 1970
(midnight UTC/GMT)
Problem: Consecutive calls return very similar seeds
40/78
Seed 2/3
A random device std::random device is a uniformly distributed integer generator
that produces non-deterministic random numbers (e.g. from a hardware device)
Note: Not all systems provide a random device
#include <random>
std::random_device rnd_device;
std::default_random_engine generator(rnd_device());
std::seed seq consumes a sequence of integer-valued data and produces a number
of unsigned integer values in the range [0, 2
32
− 1]. The produced values are
distributed over the entire 32-bit range even if the consumed values are close
41/78
Seed 3/3
#include <random>
#include <chrono>
unsigned seed1 = std::chrono::system_clock::now()
.time_since_epoch().count();
unsigned seed2 = seed1 + 1000;
std::seed_seq seq1{ seed1, seed2 };
std::default_random_engine generator1(seq);
std::random_device rnd;
std::default_random_engine generator1(rnd());
42/78
PRNG Period and Quality
PRNG Period
The period (or cycle length) of a PRNG is the length of the sequence of numbers that the
PRNG generates before repeating
PRNG Quality
(informal) If it is hard to distinguish a generator output from truly random sequences, we call it
a high quality generator. Otherwise, we call it low quality generator
Generator Quality Period Randomness
Linear Congruential Poor 2
31
≈ 10
9
Statistical tests
Mersenne Twister 32/64-bit High 10
6000
Statistical tests
Subtract-with-carry 24/48-bit Highest 10
171
Mathematically proven
43/78
Random Engines
• Linear congruential (LF)
The simplest generator engine. Modulo-based algorithm:
x
i+1
= (αx
i
+ c)mod m where α, c, m are implementation defined
C++ Generators: std::minstd rand , std::minstd rand0 ,
std::knuth b
• Mersenne Twister (M. Matsumoto and T. Nishimura, 1997)
Fast generation of high-quality pseudorandom number. It relies on Mersenne prime number.
(used as default random generator in linux)
C++ Generators: std::mt19937 , std::mt19937 64
• Subtract-with-carry (LF) (G. Marsaglia and A. Zaman, 1991)
Pseudo-random generation based on Lagged Fibonacci algorithm (used for example by
physicists at CERN)
C++ Generators: std::ranlux24 base , std::ranlux48 base , std::ranlux24 , std::ranlux48
44/78
Statistical Tests
The table shows after how many iterations the generator fails the statistical tests
Generator 256M 512M 1G 2G 4G 8G 16G 32G 64G 128G 256G 512G 1T
ranlux24 base ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
ranlux48 base ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
minstd rand ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
minstd rand0 ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
knuth b ✓ ✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
mt19937 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✗ ✗ ✗
mt19937 64 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✗ ✗
ranlux24 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
ranlux48 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
45/78
Space and Performance
Generator Predictability State Performance
Linear Congruential Trivial 4-8 B Fast
Knuth Trivial 1 KB Fast
Mersenne Twister Trivial 2 KB Good
randlux base Trivial 8-16 B Slow
randlux Unknown? ∼120 B Super slow
46/78
Distribution
• Uniform distribution uniform int distribution<T>(range start, range end)
where T is integral type
uniform real distribution<T>(range start, range end) where T is floating
point type
• Normal distribution P (x) =
1
σ
√
2π
e
−
(x−µ)
2
2σ
2
normal distribution<T>(mean, std dev)
where T is floating point type
• Exponential distribution P (x , λ) = λe
−λx
exponential distribution<T>(lambda)
where T is floating point type
47/78
Examples
unsigned seed = ...
// Original linear congruential
minstd_rand0 lc1 generator(seed);
// Linear congruential (better tuning)
minstd_rand lc2_generator(seed);
// Standard mersenne twister (64-bit)
mt19937_64 mt64_generator(seed);
// Subtract-with-carry (48-bit)
ranlux48_base swc48_generator(seed);
uniform_int_distribution<int> int_distribution(0, 10);
uniform_real_distribution<float> real_distribution(-3.0f, 4.0f);
exponential_distribution<float> exp_distribution(3.5f);
normal_distribution<double> norm_distribution(5.0, 2.0);
48/78
Quasi-random 1/2
The quasi-random numbers have the low-discrepancy property that is a measure of
uniformity for the distribution of the point for the multi-dimensional case
• Quasi-random sequence, in comparison to pseudo-random sequence, distributes
evenly, namely this leads to spread the number over the entire region
• The concept of low-discrepancy is associated with the property that the successive
numbers are added in a position as away as possible from the other numbers that
is, avoiding clustering (grouping of numbers close to each other)
51/78
Quasi-random 2/2
Pseudo-random vs. Quasi random
52/78
Time Measuring 1/5
Wall-Clock/Real time
It is the human perception of the passage of time from the start to the completion of
a task
User/CPU time
The amount of time spent by the CPU to compute in user code
System time
The amount of time spent by the CPU to compute system calls (including I/O calls)
executed into kernel code
Note: if the system workload (except the current program) is very low and the
program uses only one thread then
Wall-clock time = User time + System time
53/78
Time Measuring - Wall-Clock Time 1 2/5
::gettimeofday() (linux, not portable)
# include <time.h> //struct timeval
# include <sys/time.h> //gettimeofday()
struct timeval start, end; // timeval {second, microseconds}
::gettimeofday(&start, NULL);
... // code
::gettimeofday(&end, NULL);
long start_time = start.tv_sec * 1000000 + start.tv_usec;
long end_time = end.tv_sec * 1000000 + end.tv_usec;
cout << "Elapsed: " << end_time - start_time; // in microsec
Problems: not portable, the time is not monotonic increasing (timezone)
54/78
Time Measuring - Wall-Clock Time 2 3/5
std::chrono C++11
# include <chrono>
auto start_time = std::chrono::system_clock::now();
... // code
auto end_time = std::chrono::system_clock::now();
std::chrono::duration<double> diff = end_time - start_time;
cout << "Elapsed: " << diff.count(); // in seconds
cout << std::chrono::duration_cast<milli>(diff).count(); // in ms
Problems: The time is not monotonic increasing (timezone)
An alternative of system clock is steady clock which ensures monotonic increasing time
55/78
Time Measuring - User Time 4/5
std::clock
# include <chrono>
clock_t start_time = std::clock();
... // code
clock_t end_time = std::clock();
float diff = static_cast<float>(end_time - start_time) / CLOCKS_PER_SEC;
cout << "Elapsed: " << diff; // in seconds
56/78
Time Measuring - User/System Time 5/5
# include <sys/times.h>
struct ::tms start_time, end_time;
::times(&start_time);
... // code
::times(&end_time);
auto user_diff = end_time.tmus_utime - start_time.tms_utime;
auto sys_diff = end_time.tms_stime - start_time.tms_stime;
float user = static_cast<float>(user_diff) / ::sysconf(_SC_CLK_TCK);
float sys = static_cast<float>(sys_diff) / ::sysconf(_SC_CLK_TCK);
cout << "user time: " << user; // in seconds
cout << "system time: " << sys; // in seconds
57/78
std::pair 1/2
<utility>
std::pair class couples together a pair of values, which may be of different types
Construct a std::pair
• std::pair<T1, T2> pair(value1, value2)
• std::pair<T1, T2> pair = {value1, value2}
• auto pair = std::make pair(value1, value2)
Data members:
• first access first field
• second access second field
Methods:
• comparison ==, <, >, ≥, ≤
• swap std::swap
58/78
std::pair 2/2
# include <utility>
std::pair<int, std::string> pair1(3, "abc");
std::pair<int, std::string> pair2 = { 4, "zzz" };
auto pair3 = std::make_pair(3, "hgt");
cout << pair1.first; // print 3
cout << pair1.second; // print "abc"
swap(pair1, pair2);
cout << pair2.first; // print "zzz"
cout << pair2.second; // print 4
cout << (pair1 > pair2); // print 1
59/78
std::tuple 1/3
<tuple>
std::tuple is a fixed-size collection of heterogeneous values. It is a generalization of
std::pair . It allows any number of values
Construct a std::tuple (of size 3)
• std::tuple<T1, T2, T3> tuple(value1, value2, value3)
• std::tuple<T1, T2, T3> tuple = {value1, value2, value3}
• auto tuple = std::make tuple(value1, value2, value3)
Data members:
std:get<I>(tuple) returns the i-th value of the tuple
Methods:
• comparison ==, <, >, ≥, ≤
• swap std::swap
60/78
std::tuple 2/3
• auto t3 = std::tuple cat(t1, t2)
concatenate two tuples
• const int size = std::tuple size<TupleT>::value
returns the number of elements in a tuple at compile-time
• using T = typename std::tuple element<TupleT>::type obtains the
type of the specified element
• std::tie(value1, value2, value3) = tuple
creates a tuple of references to its arguments
• std::ignore
an object of unspecified type such that any value can be assigned to it with no
effect
61/78
std::tuple 3/3
# include <tuple>
std::tuple<int, float, char> f() { return {7, 0.1f, 'a'}; }
std::tuple<int, char, float> tuple1(3, 'c', 2.2f);
auto tuple2 = std::make_tuple(2, 'd', 1.5f);
cout << std::get<0>(tuple1); // print 3
cout << std::get<1>(tuple1); // print 'c'
cout << std::get<2>(tuple1); // print 2.2f
cout << (tuple1 > tuple2); // print true
auto concat = std::tuple_cat(tuple1, tuple2);
cout << std::tuple_size<decltype(concat)>::value; // print 6
using T = std::tuple_element<4, decltype(concat)>::type; // T is int
int value1; float value2;
std::tie(value1, value2, std::ignore) = f();
62/78
std::variant 1/3
<variant> C++17
std::variant represents a type-safe union as the corresponding objects know
which type is currently being held
It can be indexed by:
• std::get<index>(variant) an integer
• std::get<type>(variant) a type
# include <variant>
std::variant<int, float, bool> v(3.3f);
int x = std::get<0>(v); // return integer value
bool y = std::get<bool>(v); // return bool value
// std::get<0>(v) = 2.0f; // run-time exception!!
63/78
std::variant 2/3
Another useful method is index() which returns the position of the type currently
held by the variant
# include <variant>
std::variant<int, float, bool> v(3.3f);
cout << v.index(); // return 1
std::get<bool>(v) = true
cout << v.index(); // return 2
64/78
std::variant + Visitor 3/3
It is also possible to query the index at run-time depending on the type currently being
held by providing a visitor
# include <variant>
struct Visitor {
void operator()(int& value) { value *= 2; }
void operator()(float& value) { value += 3.0f; } // <--
void operator()(bool& value) { value = true; }
};
std::variant<int, float, bool> v(3.3f);
std::visit(v, Visitor{});
cout << std::get<float>(v); // 6.3f
65/78
std::optional 1/2
<optional> C++17
std::optional provides facilities to represent potential “no value” states
As an example, it can be used for representing the state when an element is not found
in a set
# include <optional>
std::optional<std::string> find(const char* set, char value) {
for (int i = 0; i < 10; i++) {
if (set[i] == value)
return i;
}
return {}; // std::nullopt;
}
66/78
std::optional 2/2
# include <optional>
char set[] = "sdfslgfsdg";
auto x = find(set, 'a'); // 'a' is not present
if (!x)
cout << "not found";
if (!x.has_value())
cout << "not found";
auto y = find(set, 'l');
cout << *y << " " << y.value(); // print '4' '4'
x.value_or(-1); // returns '-1'
y.value_or(-1); // returns '4'
67/78
std::any
<any> C++17
std::any holds arbitrary values and provides type-safety
# include <any>
std::any var = 1; // int
cout << var.type().name(); // print 'i'
cout << std::any_cast<int>(var);
// cout << std::any_cast<float>(var); // exception!!
var = 3.14; // double
cout << std::any_cast<double>(var);
var.reset();
cout << var.has_value(); // print 'false'
68/78
std::stacktrace 1/2
C++23 introduces std::stacktrace library to get the current function call stack,
namely the sequence of calls from the main() entry point
# include <print>
# include <stacktrace> // the program must be linked with the library
// -lstdc++_libbacktrace
// (-lstdc++exp with gcc-14 trunk)
void g() {
auto call_stack = std::stacktrace::current();
for (const auto& entry : call_stack)
std::print("{}\n", entry);
}
void f() { g(); }
int main() { f(); }
69/78
std::stacktrace 2/2
the previous code prints
g() at /app/example.cpp:6
f() at /app/example.cpp:11
main at /app/example.cpp:13
at :0
__libc_start_main at :0
_start at :0
The library also provides additional functions for entry to allow fine-grained control
of the output description() , source file() , source line()
for (const auto& entry : call_stack) { // same output
std::print("{} at {}:{}\n", entry.description(), entry.source_file(),
entry.source_line());
}
70/78
Filesystem Library
C++17 introduces abstractions and facilities for performing operations on file systems
and their components, such as paths, files, and directories
• Follow the Boost filesystem library
• Based on POSIX
• Fully-supported from clang 7, gcc 8, etc.
• Work on Windows, Linux, Android, etc.
71/78
Basic concepts
• file: a file system object that holds data
◦ directory a container of directory entries
◦ hard link associates a name with an existing file
◦ symbolic link associates a name with a path
◦ regular file a file that is not one of the other file types
• file name: a string of characters that names a file. Names . (dot) and ..
(dot-dot) have special meaning at library level
• path: sequence of elements that identifies a file
◦ absolute path: a path that unambiguously identifies the location of a file
◦ canonical path: an absolute path that includes no symlinks, . or .. elements
◦ relative path: a path that identifies a file relative to some location on the file system
72/78
path Object
A path object stores the pathname in native form
# include <filesystem> // required
namespace fs = std::filesystem;
fs::path p1 = "/usr/lib/sendmail.cf"; // portable format
fs::path p2 = "C:\\users\\abcdef\\"; // native format
cout << "p1: " << p1; // /usr/lib/sendmail.cf
cout << "p2: " << p2; // C:\users\abcdef\
out << "p3: " << p2 + "xyz\\"; // C:\users\abcdef\xyz\
73/78
path Methods
Decomposition (member) methods:
• Return root-name of the path
root name()
• Return path relative to the root path
relative path()
• Return the path of the parent path
parent path()
• Return the filename path component
filename()
• Return the file extension path component
extension()
74/78
Filesystem Methods - Query
• Check if a file or path exists
exists(path)
• Return the file size
file size(path)
• Check if a file is a directory
is directory(path)
• Check if a file (or directory) is empty
is empty(path)
• Check if a file is a regular file
is regular file(path)
• Returns the current path
current path()
75/78
Directory Iterators
Iterate over files of a directory (recursively/non-recursively)
# include <filesystem>
namespace fs = std::filesystem;
for(auto& path : fs::directory_iterator("/usr/tmp/"))
cout << path << '\n';
for(auto& path : fs::recursive_directory_iterator("/usr/tmp/"))
cout << path << '\n';
76/78
Filesystem Methods - Modify
• Copy files or directories
copy(path1, path2)
• Copy files
copy file(src path, src path, [fs::copy options::recursive])
• Create new directory
create directory(path)
• Remove a file or empty directory
remove(path)
• Remove a file or directory and all its contents, recursively
remove all(path)
• Rename a file or directory
rename(old path, new path)
77/78
Examples
# include <filesystem> // required
namespace fs = std::filesystem;
fs::path p1 = "/usr/tmp/my_file.txt";
cout << p1.exists(); // true
cout << p1.parent_path(); // "/usr/tmp/"
cout << p1.filename(); // "my_file"
cout << p1.extension(); // "txt"
cout << p1.is_directory(); // false
cout << p1.is_regular_file(); // true
fs::create_directory("/my_dir/");
fs::copy(p1.parent_path(), "/my_dir/", fs::copy_options::recursive);
fs::copy_file(p1, "/my_dir/my_file2.txt");
fs::remove(p1);
fs::remove_all(p1.parent_path());
78/78
