Exercism/bash/resistor-color-duo

Resistor Color Duo

Welcome to Resistor Color Duo on Exercism's Bash Track. If you need help running the tests or submitting your code, check out HELP.md.

Instructions

If you want to build something using a Raspberry Pi, you'll probably use resistors. For this exercise, you need to know two things about them:

• Each resistor has a resistance value.
• Resistors are small - so small in fact that if you printed the resistance value on them, it would be hard to read.

To get around this problem, manufacturers print color-coded bands onto the resistors to denote their resistance values. Each band has a position and a numeric value.

The first 2 bands of a resistor have a simple encoding scheme: each color maps to a single number. For example, if they printed a brown band (value 1) followed by a green band (value 5), it would translate to the number 15.

In this exercise you are going to create a helpful program so that you don't have to remember the values of the bands. The program will take color names as input and output a two digit number, even if the input is more than two colors!

The band colors are encoded as follows:

• Black: 0
• Brown: 1
• Red: 2
• Orange: 3
• Yellow: 4
• Green: 5
• Blue: 6
• Violet: 7
• Grey: 8
• White: 9

From the example above: brown-green should return 15 brown-green-violet should return 15 too, ignoring the third color.

Source

Created by

• @glennj

Contributed to by

• @bkhl
• @guygastineau
• @IsaacG
• @kotp

Based on

Maud de Vries, Erik Schierboom - https://github.com/exercism/problem-specifications/issues/1464